Chapter 20 Logs
Figure 169 Maintenance > Logs > View Log
The following table describes the fields in this screen.
Table 100 Maintenance > Logs > View Log
LABEL | DESCRIPTION |
Display | The categories that you select in the Log Settings screen display in the |
| list box. |
| Select a category of logs to view; select All Logs to view logs from all of the log |
| categories that you selected in the Log Settings page. |
Email Log Now | Click this to send the log screen to the |
| page (make sure that you have first filled in the |
| Settings). |
Refresh | Click this to renew the log screen. |
|
|
Clear Log | Click this to delete all the logs. |
|
|
# | This field is a sequential value and is not associated with a specific entry. |
|
|
Time | This field displays the time the log was recorded. |
|
|
Message | This field states the reason for the log. |
|
|
Source | This field lists the source IP address and the port number of the incoming packet. |
|
|
Destination | This field lists the destination IP address and the port number of the incoming |
| packet. |
|
|
Notes | This field displays additional information about the log entry. |
|
|
20.3 The Log Settings Screen
Use the Log Settings screen to configure the mail server, the syslog server, when to send logs and what logs to send.
To change your ZyXEL Device’s log settings, click Maintenance > Logs > Log Settings. The screen appears as shown.
Alerts are
278 |
| |
| ||
|
|
|