Chapter 1 Introducing the ZyXEL Device

1.7.1 Turn the Wireless LAN Off or On

1Make sure the POWER LED is on (not blinking).

2Press the WPS WLAN ON/OFF button for less than five seconds and release it. The WLAN/WPS LED should change from on to off or vice versa.

1.7.2Activate WPS

1Make sure the POWER LED is on (not blinking).

2Press the WPS WLAN ON/OFF button for five to ten seconds and release it. Press the WPS button on another WPS -enabled device within range of the ZyXEL Device. The WLAN/WPS LED should flash while the ZyXEL Device sets up a WPS connection with the wireless device.

"You must activate WPS in the ZyXEL Device and in another wireless device within two minutes of each other. See Section 7.9.8 on page 128 for more information.

 

37

P-660HN-F1 User’s Guide