Chapter 14 802.1Q/1P
Table 81 Advanced > 802.1Q/1P > Group Setting > Edit (continued)
LABEL | DESCRIPTION |
Tx Tag | Select Tx Tagging if you want the port to tag all outgoing traffic trasmitted through |
| this VLAN. You select this if you want to create VLANs across different devices and |
| not just the ZyXEL Device. |
|
|
Back | Click this to return to the previous screen without saving. |
|
|
Apply | Click this to save your changes. |
|
|
Cancel | Click this to restore your previously saved settings. |
|
|
14.3 The 802.1Q/1P Port Setting Screen
Use this screen to configure the PVID and assign traffic priority for each port. Click Advanced > 802.1Q/1P > Port Setting to display the following screen.
Figure 132 Advanced > 802.1Q/1P > Port Setting
The following table describes the labels in this screen.
Table 82 Advanced > 802.1Q/1P > Port Setting
LABEL | DESCRIPTION |
Ports | This field displays the types of ports available to join the VLAN group. |
|
|
802.1Q PVID | Assign a VLAN ID for the port. The valid VID range is between 1 and 4094. The |
| ZyXEL Device assigns the PVID to untagged frames or |
| received on this port. |
|
|
224 |
| |
| ||
|
|
|