Chapter 4 Internet and Wireless Setup Wizard
The following table describes the fields in this screen.
Table 10 Internet Connection with RFC 1483
LABEL | DESCRIPTION |
IP Address | This field is available if you select Routing in the Mode field. |
| Type your ISP assigned IP address in this field. |
|
|
Back | Click this to return to the previous screen without saving. |
|
|
Next | Click this to continue to the next wizard screen. |
|
|
Exit | Click this to close the wizard screen without saving. |
|
|
Figure 19 Internet Connection with ENET ENCAP
The following table describes the fields in this screen.
Table 11 Internet Connection with ENET ENCAP
LABEL | DESCRIPTION |
Obtain an IP | A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not |
Address | fixed; the ISP assigns you a different one each time you connect to the Internet. |
Automatically | Select Obtain an IP Address Automatically if you have a dynamic IP address. |
|
|
Static IP | Select Static IP Address if your ISP gave you an IP address to use. |
Address |
|
|
|
IP Address | Enter your ISP assigned IP address. |
|
|
Subnet Mask | Enter a subnet mask in dotted decimal notation. |
| Refer to the appendix to calculate a subnet mask If you are implementing subnetting. |
|
|
Gateway IP | You must specify a gateway IP address (supplied by your ISP) when you use ENET |
address | ENCAP in the Encapsulation field in the previous screen. |
|
|
First DNS | Enter the IP addresses of the DNS servers. The DNS servers are passed to the DHCP |
Server | clients along with the IP address and the subnet mask. |
|
|
Second DNS | As above. |
Server |
|
|
|
Back | Click this to return to the previous screen without saving. |
|
|
58 |
| |
| ||
|
|
|