|
| Chapter 17 Remote Management |
| Table 90 Advanced > Remote Management > WWW | |
| LABEL | DESCRIPTION |
| Secured Client IP | A secured client is a “trusted” computer that is allowed to communicate with the |
|
| ZyXEL Device using this service. |
|
| Select All to allow any computer to access the ZyXEL Device using this service. |
|
| Choose Selected to just allow the computer with the IP address that you specify to |
|
| access the ZyXEL Device using this service. |
|
|
|
| Apply | Click this to save your changes. |
|
|
|
| Cancel | Click this to restore your previously saved settings. |
|
|
|
17.3 The Telnet Screen
You can use Telnet to access the ZyXEL Device’s command line interface. Specify which interfaces allow Telnet access and from which IP address the access can come.
Click Advanced > Remote MGMT > Telnet tab to display the screen as shown.
Figure 146 Advanced > Remote Management > Telnet
The following table describes the labels in this screen.
Table 91 Advanced > Remote Management > Telnet
LABEL | DESCRIPTION |
Port | You may change the server port number for a service if needed, however you must |
| use the same port number in order to use that service for remote management. |
|
|
Access Status | Select the interface(s) through which a computer may access the ZyXEL Device |
| using this service. |
|
|
Secured Client | A secured client is a “trusted” computer that is allowed to communicate with the |
IP | ZyXEL Device using this service. |
| Select All to allow any computer to access the ZyXEL Device using this service. |
| Choose Selected to just allow the computer with the IP address that you specify to |
| access the ZyXEL Device using this service. |
|
|
Apply | Click this to save your changes. |
|
|
Cancel | Click this to restore your previously saved settings. |
|
|
| 249 |
|
|