Chapter 7 Wireless LAN
The following table describes the labels in this screen.
Table 34 Network > Wireless LAN > AP: MAC Address Filter
LABEL | DESCRIPTION |
Active MAC | Select the check box to enable MAC address filtering. |
Filter |
|
|
|
Filter Action | Define the filter action for the list of MAC addresses in the MAC Address table. |
| Select Deny to block access to the ZyXEL Device. MAC addresses not listed will be |
| allowed to access the ZyXEL Device |
| Select Allow to permit access to the ZyXEL Device. MAC addresses not listed will be |
| denied access to the ZyXEL Device. |
|
|
Set | This is the index number of the MAC address. |
|
|
MAC | Enter the MAC addresses of the wireless devices that are allowed or denied access to |
Address | the ZyXEL Device in these address fields. Enter the MAC addresses in a valid MAC |
| address format, that is, six hexadecimal character pairs, for example, |
| 12:34:56:78:9a:bc. |
|
|
Back | Click this to return to the previous screen without saving. |
|
|
Apply | Click this to save your changes. |
|
|
Cancel | Click this to restore your previously saved settings. |
|
|
7.3 The More AP Screen
This screen allows you to enable and configure multiple Basic Service Sets (BSSs) on the ZyXEL Device.
Click Network > Wireless LAN > More AP. The following screen displays.
Figure 55 Network > Wireless LAN > More AP
The following table describes the labels in this screen.
Table 35 Network > Wireless LAN > More AP
LABEL | DESCRIPTION |
# | This is the index number of each SSID profile. |
|
|
Active | Select the check box to activate an SSID profile. |
|
|
| 115 |
|
|