Chapter 11 Packet Filter
Figure 101 Security > Packet Filter
The following table describes the labels in this screen.
Table 61 Security > Packet Filter
LABEL | DESCRIPTION |
# | This field displays the index number of the filter set. |
|
|
Name | Enter a name for the filter set. The text may consist of up to 16 letters, numerals |
| and any printable character found on a typical English language keyboard. |
|
|
Filter Type | Select Protocol Filter or Generic Filter for your filter set. |
| Protocol filter rules are used to filter IP packets while generic filter rules allow |
| filtering of |
|
|
Modify | Click the Edit button to configure a filter set. |
| Click the Remove button to delete a filter set. |
|
|
Apply | Click this to save your changes. |
|
|
Cancel | Click this to restore your previously saved settings. |
|
|
Use this screen to display a protocol filter set on your ZyXEL Device. Protocol rules allow you to base the rule on the fields in the IP and the upper layer protocol, for example, UDP and TCP headers.
In the Packet Filter screen, select Protocol Filter from the Filter Type field. Then click the Edit button from the Modify field to display the following screen.
178 |
| |
| ||
|
|
|