ZyXEL Communications P-660HN-F1 6.3 The DHCP Setup Screen

	Chapter 6 LAN Setup
Table 24 Network > LAN > IP: Advanced Setup
LABEL	DESCRIPTION
Allow between LAN	Select this check box to forward NetBIOS packets from the LAN to the WAN
and WAN	and from the WAN to the LAN. If your firewall is enabled with the default policy
	set to block WAN to LAN traffic, you also need to enable the default WAN to
	LAN firewall rule that forwards NetBIOS traffic.
	Clear this check box to block all NetBIOS packets going from the LAN to the
	WAN and from the WAN to the LAN.
Packet Filter
Incoming Filter Sets
Protocol Filter	Select the protocol filter(s) to control incoming traffic. You may choose up to 4
	sets of filters.
	You can configure packet filters in the Packet Filter screen. See Chapter 11 on
	page 177 for more details.
Generic Filter	Select the generic filter(s) to control incoming traffic. You may choose up to 4
	sets of filters.
	You can configure generic filters in the Packet Filter screen. See Chapter 11 on
	page 177 for more details.
Outgoing Filter Sets
Protocol Filter	Select the protocol filter(s) to control outgoing traffic. You may choose up to 4
	sets of filters.
	You can configure protocol filters in the Packet Filter screen. See Chapter 11
	on page 177 for more details.
Generic Filter	Select the generic filter(s) to control outgoing traffic. You may choose up to 4
	sets of filters.
	You can configure generic filters in the Packet Filter screen. See Chapter 11 on
	page 177 for more details.
Back	Click this to return to the previous screen without saving.
Apply	Click this to save your changes.
Cancel	Click this to restore your previously saved settings.

6.3 The DHCP Setup Screen

Use this screen to configure the DNS server information that the ZyXEL Device sends to the DHCP client devices on the LAN. Click Network > DHCP Setup to open this screen.

	93
P-660HN-F1 User’s Guide