Chapter 13 Static Route
13.2 The Static Route Screen
Use this screen to view the static route rules. Click Advanced > Static Route to open the Static Route screen.
Figure 123 Advanced > Static Route
The following table describes the labels in this screen.
Table 78 Advanced > Static Route
LABEL | DESCRIPTION |
# | This is the number of an individual static route. |
|
|
Active | This field indicates whether the rule is active or not. |
| Clear the check box to disable the rule. Select the check box to enable it. |
|
|
Name | This is the name that describes or identifies this route. |
|
|
Destination | This parameter specifies the IP network address of the final destination. Routing is |
| always based on network number. |
|
|
Gateway | This is the IP address of the gateway. The gateway is a router or switch on the same |
| network segment as the device's LAN or WAN port. The gateway helps forward |
| packets to their destinations. |
|
|
Subnet Mask | This parameter specifies the IP network subnet mask of the final destination. |
|
|
Modify | Click the Edit icon to go to the screen where you can set up a static route on the |
| ZyXEL Device. |
| Click the Remove icon to remove a static route from the ZyXEL Device. A window |
| displays asking you to confirm that you want to delete the route. |
|
|
Apply | Click this to save your changes. |
|
|
Cancel | Click this to restore your previously saved settings. |
|
|
214 |
| |
| ||
|
|
|