Chapter 15 Quality of Service (QoS)
Table 85 Advanced > QoS > Class Setup: Edit (continued)
LABEL | DESCRIPTION |
Ethernet Priority | Select this option and select a priority level (between 0 and 7) from the drop |
| down list box. |
| "0" is the lowest priority level and "7" is the highest. |
|
|
VLAN ID | Select this option and specify a VLAN ID number between 2 and 4094. |
|
|
Physical Port | Select this option and select a LAN port. |
|
|
Remote Node | Select this option and select a remote node from the drop down list box. When |
| the WAN type is Ethernet in the WAN > Internet Access Setup screen, you |
| can select WAN1 only. |
Exclude | Select this option to exclude the packets that match the specified criteria from |
| this classifier. |
|
|
Back | Click this to return to the previous screen without saving. |
|
|
Apply | Click this to save your changes. |
|
|
Cancel | Click this to restore your previously saved settings. |
|
|
15.4 The QoS Monitor Screen
Use this screen to view the ZyXEL Device’s QoS packet statistics. Click Advanced > QoS > Monitor. The screen appears as shown.
Figure 141 Advanced > QoS > Monitor
The following table describes the labels in this screen.
Table 86 Advanced > QoS > Monitor
LABEL | DESCRIPTION |
Priority Queue | This shows the priority queue number. |
| Traffic assigned to higher index queues gets through faster while traffic in lower |
| index queues is dropped if the network is congested. |
|
|
Pass | This shows how many packets mapped to this priority queue are transmitted |
| successfully. |
|
|
Drop | This shows how many packets mapped to this priority queue are dropped. |
|
|
Poll Interval(s) | Enter the time interval for refreshing statistics in this field. |
|
|
236 |
| |
| ||
|
|
|