Chapter 11 Packet Filter
Figure 102 Security > Packet Filter > Edit (Protocol Filter)
The following table describes the labels in this screen.
Table 62 Security > Packet Filter > Edit (Protocol Filter)
LABEL | DESCRIPTION |
# | This is the index number of the rules in a filter set. |
|
|
Active | Use the check box to turn a filter rule on or off. |
|
|
Filter Type | This field displays whether the filter type is a protocol filter or generic filter. |
|
|
Protocol | This field displays the upper layer protocol. |
|
|
SA | This field displays the source IP address. |
|
|
DA | This field displays the destination IP address. |
|
|
Modify | Click the Edit icon to configure a filter rule. |
| Click the Remove icon to delete a filter rule. |
|
|
Back | Click this to return to the previous screen without saving. |
|
|
Apply | Click this to save your changes. |
|
|
Cancel | Click this to restore your previously saved settings. |
|
|
Use this screen to configure protocol filter rules. In the Edit (Protocol Filter) screen, click an Edit icon to display the following screen.
| 179 |
|
|