Chapter 8 Wireless LAN
Table 30 Network > Wireless LAN > AP: WPA(2)
LABEL | DESCRIPTION |
Authentication Server | |
|
|
IP Address | Enter the IP address of the external authentication server in dotted |
| decimal notation. |
|
|
Port Number | Enter the port number of the external authentication server. |
| You need not change this value unless your network administrator |
| instructs you to do so with additional information. |
|
|
Shared Secret | Enter a password (up to 31 alphanumeric characters) as the key to be |
| shared between the external authentication server and the ZyXEL |
| Device. |
| The key must be the same on the external authentication server and |
| your ZyXEL Device. The key is not sent over the network. |
|
|
8.2.5 Wireless LAN Advanced Setup
Use this screen to configure advanced wireless settings. Click the Advanced Setup button in the AP screen. The screen appears as shown.
See Section 8.8.2 on page 120 for detailed definitions of the terms listed in this screen.
Figure 47 Network > Wireless LAN > AP: Advanced Setup
The following table describes the labels in this screen.
Table 31 Network > Wireless LAN > AP: Advanced Setup
LABEL | DESCRIPTION |
RTS/CTS | Enter a value between 0 and 2432. |
Threshold |
|
|
|
Fragmentation | This is the maximum data fragment size that can be sent. Enter a value |
Threshold | between 256 and 2432. |
|
|
108 |
| |
| ||
|
|
|