Chapter 6 WAN Setup

Table 19 Network > WAN > More Connections: Edit (continued)

LABEL

DESCRIPTION

ENET ENCAP

This option is available if you select ENET ENCAP in the

Gateway

Encapsulation field.

 

Specify a gateway IP address (supplied by your ISP).

 

 

Connection

 

 

 

Nailed-Up Connection

Select Nailed-Up Connection when you want your connection

 

up all the time. The ZyXEL Device will try to bring up the

 

connection automatically if it is disconnected.

 

 

Connect on Demand

Select Connect on Demand when you don't want the connection

 

up all the time and specify an idle time-out in the Max Idle

 

Timeout field.

 

 

Max Idle Timeout

Specify an idle time-out in the Max Idle Timeout field when you

 

select Connect on Demand. The default setting is 0, which

 

means the Internet session will not timeout.

 

 

NAT

SUA only is available only when you select Routing in the Mode

 

field.

 

Select SUA Only if you have one public IP address and want to

 

use NAT. Click Edit Detail to go to the Port Forwarding screen

 

to edit a server mapping set.

 

Otherwise, select None to disable NAT.

 

 

Back

Click this to return to the previous screen without saving.

 

 

Apply

Click this to save your changes.

 

 

Cancel

Click this to restore your previously saved settings.

 

 

Advanced Setup

Click this to display the More Connections Advanced Setup

 

screen and edit more details of your WAN setup.

 

 

6.3.2 Configuring More Connections Advanced Setup

Use this screen to edit your ZyXEL Device's advanced WAN settings. Click the Advanced Setup button in the More Connections Edit screen. The screen appears as shown.

Figure 33 Network > WAN > More Connections: Edit: Advanced Setup

80

 

P-660HN-T1H User’s Guide