Chapter 18 CWMP
18.2 The CWMP Setup Screen
Use this screen to configure your ZyXEL Device to be managed by a management server. Click Advanced> CWMP to display the following screen.
Figure 97 Advanced > CWMP
The following table describes the fields in this screen.
Table 70 Advanced > CWMP
LINK DESCRIPTION
CWMP Setup
CWMP | Select Activated to allow the ZyXEL Device to be managed by a |
| management server or select Deactivated to not allow the ZyXEL Device |
| to be managed by a management server. |
|
|
Login ACS | Configure this part of the screen to log into the management server. |
|
|
URL | Type the IP address or domain name of the management server. If the |
| ZyXEL Device is behind a NAT router that assigns it a private IP address, |
| you will have to configure a NAT port forwarding rule on the NAT router. |
|
|
User Name | The user name is used to authenticate the ZyXEL Device when making a |
| connection to the management server. This user name on the management |
| server and the ZyXEL Device must be the same. Type a user name of up to |
| 255 printable characters found on an |
| and characters such as @#$%^&*()_+ are allowed. |
|
|
202 |
| |
| ||
|
|
|