Chapter 7 LAN Setup
The following table describes the fields in this screen.
Table 21 Network > LAN > IP
LABEL | DESCRIPTION |
IP Address | Enter the LAN IP address you want to assign to your ZyXEL Device in |
| dotted decimal notation, for example, 192.168.1.1 (factory default). |
|
|
IP Subnet Mask | Type the subnet mask of your network in dotted decimal notation, for |
| example 255.255.255.0 (factory default). Your ZyXEL Device |
| automatically computes the subnet mask based on the IP Address you |
| enter, so do not change this field unless you are instructed to do so. |
|
|
Apply | Click this to save your changes. |
|
|
Cancel | Click this to restore your previously saved settings. |
|
|
Advanced Setup | Click this to display the Advanced LAN Setup screen and edit more |
| details of your LAN setup. |
|
|
7.2.1 The Advanced LAN IP Setup Screen
Use this screen to edit your ZyXEL Device's RIP, multicast and Windows Networking settings. Click the Advanced Setup button in the LAN IP screen. The screen appears as shown.
Figure 36 Network > LAN > IP: Advanced Setup
The following table describes the labels in this screen.
Table 22 Network > LAN > IP: Advanced Setup
LABEL | DESCRIPTION |
RIP & Multicast Setup | |
|
|
RIP Direction | Select the RIP direction from None, Both, In Only and Out Only. |
|
|
RIP Version | Select the RIP version from |
|
|
Multicast | IGMP (Internet Group Multicast Protocol) is a |
| used to establish membership in a multicast group. The ZyXEL Device |
| supports |
| it. |
|
|
Back | Click this to return to the previous screen without saving. |
|
|
Apply | Click this to save your changes. |
|
|
Cancel | Click this to restore your previously saved settings. |
|
|
90 |
| |
| ||
|
|
|