|
| Chapter 8 Wireless LAN |
|
|
|
| Table 31 Network > Wireless LAN > AP: Advanced Setup | |
| LABEL | DESCRIPTION |
| Output Power | Set the output power of the ZyXEL Device. If there is a high density of |
|
| APs in an area, decrease the output power to reduce interference with |
|
| other APs. Select one of the following: 100%, 75%, 50% or 25%. |
|
|
|
| Preamble | Select a preamble type from the |
|
| or Short. See the Appendix D on page 293 for more information. |
|
|
|
| 802.11 Mode | Select 802.11b Only to allow only IEEE 802.11b compliant WLAN |
|
| devices to associate with the ZyXEL Device. |
|
| Select 802.11g Only to allow only IEEE 802.11g compliant WLAN |
|
| devices to associate with the ZyXEL Device. |
|
| Select 802.11b+g to allow either IEEE 802.11b or IEEE 802.11g |
|
| compliant WLAN devices to associate with the ZyXEL Device. The |
|
| transmission rate of your ZyXEL Device might be reduced. |
|
| Select 802.11n to allow only IEEE 802.11n compliant WLAN devices to |
|
| associate with the ZyXEL Device. |
|
| Select 802.11g+n to allow either IEEE 802.11g or IEEE 802.11n |
|
| compliant WLAN devices to associate with the ZyXEL Device. The |
|
| transmission rate of your ZyXEL Device might be reduced. |
|
| Select 802.11b+g+n to allow IEEE 802.11b, IEEE 802.11g or |
|
| IEEE802.11n compliant WLAN devices to associate with the ZyXEL |
|
| Device. The transmission rate of your ZyXEL Device might be reduced. |
|
|
|
| Back | Click this to return to the previous screen without saving. |
|
|
|
| Apply | Click this to save your changes. |
|
|
|
| Cancel | Click this to restore your previously saved settings. |
|
|
|
| 109 |
|
|