Chapter 8 Wireless LAN
Table 35 Network > Wireless LAN > WPS
LABEL | DESCRIPTION |
PIN Number | This shows the PIN (Personal Identification Number) of the ZyXEL |
| Device. Enter this PIN in the configuration utility of the device you want |
| to connect to using WPS. |
| The PIN is not necessary when you use WPS |
|
|
Generate | Click this to have the ZyXEL Device create a new PIN. |
|
|
WPS Status | This displays Configured when the ZyXEL Device has connected to a |
| wireless network using WPS or Enable WPS is selected and wireless or |
| wireless security settings have been changed. The current wireless and |
| wireless security settings also appear in the screen. |
| This displays Unconfigured if WPS is disabled and there is no wireless |
| or wireless security changes on the ZyXEL Device or you click Release |
| to remove the configured wireless and wireless security settings. |
|
|
Release | This button is available when the WPS status is Configured. |
| Click this button to remove all configured wireless and wireless security |
| settings for WPS connections on the ZyXEL Device. |
|
|
Apply | Click this to save your changes. |
|
|
Refresh | Click this to restore your previously saved settings. |
|
|
8.5 The WPS Station Screen
Use this screen to set up a WPS wireless network using either Push Button Configuration (PBC) or PIN Configuration.
Click Network > Wireless LAN > WPS Station. The following screen displays.
Figure 52 Network > Wireless LAN > WPS Station
114 |
| |
| ||
|
|
|