Chapter 20 Logs
20.3 Log Descriptions
This section provides descriptions of example log messages.
Table 74 System Maintenance Logs
LOG MESSAGE | DESCRIPTION |
Time calibration is | The router has adjusted its time based on information |
successful | from the time server. |
Time calibration failed | The router failed to get information from the time |
| server. |
|
|
WAN interface gets IP: %s | A WAN interface got a new IP address from the DHCP, |
| PPPoE, or |
|
|
DHCP client IP expired | A DHCP client's IP address has expired. |
DHCP server assigns %s | The DHCP server assigned an IP address to a client. |
Successful WEB login | Someone has logged on to the router's web |
| configurator interface. |
|
|
WEB login failed | Someone has failed to log on to the router's web |
| configurator interface. |
|
|
Successful TELNET login | Someone has logged on to the router via telnet. |
TELNET login failed | Someone has failed to log on to the router via telnet. |
Successful FTP login | Someone has logged on to the router via ftp. |
FTP login failed | Someone has failed to log on to the router via ftp. |
NAT Session Table is Full! | The maximum number of NAT session table entries |
| has been exceeded and the table is full. |
|
|
Starting Connectivity | Starting Connectivity Monitor. |
Monitor |
|
Time initialized by Daytime | The router got the time and date from the Daytime |
Server | server. |
Time initialized by Time | The router got the time and date from the time |
server | server. |
Time initialized by NTP | The router got the time and date from the NTP server. |
server |
|
Connect to Daytime server | The router was not able to connect to the Daytime |
fail | server. |
Connect to Time server fail | The router was not able to connect to the Time server. |
Connect to NTP server fail | The router was not able to connect to the NTP server. |
Too large ICMP packet has | The router dropped an ICMP packet that was too |
been dropped | large. |
Configuration Change: PC = | The router is saving configuration changes. |
0x%x, Task ID = 0x%x |
|
Successful SSH login | Someone has logged on to the router’s SSH server. |
SSH login failed | Someone has failed to log on to the router’s SSH |
| server. |
|
|
| 211 |
|
|