Chapter 9 Network Address Translation (NAT)

9.3.2 The Port Forwarding Rule Edit Screen

Use this screen to edit a port forwarding rule. Click the rule’s edit icon in the Port Forwarding screen to display the screen shown next.

Figure 66 Network > NAT > Port Forwarding: Edit

The following table describes the fields in this screen.

Table 43 Network > NAT > Port Forwarding: Edit

LABEL

DESCRIPTION

Rule Setup

 

 

 

Active

Click this check box to enable the rule.

 

 

Service Name

Enter a name to identify this port-forwarding rule.

 

 

Start Port

Enter a port number in this field.

 

To forward only one port, enter the port number again in the End Port

 

field.

 

To forward a series of ports, enter the start port number here and the end

 

port number in the End Port field.

 

 

End Port

Enter a port number in this field.

 

To forward only one port, enter the port number again in the Start Port

 

field above and then enter it again in this field.

 

To forward a series of ports, enter the last port number in a series that

 

begins with the port number in the Start Port field above.

 

 

Server IP

Enter the inside IP address of the server here.

Address

 

 

 

Port

Enter the start port number here to which you want the device to

Translation

translate the incoming port. For a range of ports, you only need to enter

Start / End

the first number of the range to which you want the incoming ports

Port

translated, the device automatically calculates the last port of the

 

translated port range.

 

 

Back

Click this to return to the previous screen without saving.

 

 

 

139

P-660HN-T1H User’s Guide