ZyXEL Communications P-660HN-T1H 5.3.2 Manually Assign a WEP Key

Chapter 5 Internet and Wireless Setup Wizard

5.3.2 Manually Assign a WEP Key

Choose Manually assign a WEP key to setup WEP Encryption parameters.

Figure 25 Manually Assign a WEP key

The following table describes the labels in this screen.

Table 15 Manually Assign a WEP key

LABEL	DESCRIPTION
Key	The WEP keys are used to encrypt data. Both the ZyXEL Device and the
	wireless stations must use the same WEP key for data transmission.
	Enter any 5 or 13 ASCII characters, or 10 or 26 hexadecimal characters
	("0-9", "A-F") for a 64-bit or 128-bit WEP key respectively.
Back	Click this to return to the previous screen without saving.
Next	Click this to continue to the next wizard screen.
Exit	Click this to close the wizard screen without saving.

5Click Apply to save your wireless LAN settings.

Figure 26 Wireless LAN Setup 3

	69
P-660HN-T1H User’s Guide