Chapter 20 Logs

For type and code details, see Table 87 on page 217.

Table 79 ICMP Logs

LOG MESSAGE

DESCRIPTION

Firewall default policy: ICMP

ICMP access matched the default policy and was

<Packet Direction>, <type:%d>,

blocked or forwarded according to the user's

<code:%d>

setting.

Firewall rule [NOT] match: ICMP

ICMP access matched (or didn’t match) a firewall

<Packet Direction>, <rule:%d>,

rule (denoted by its number) and was blocked or

<type:%d>, <code:%d>

forwarded according to the rule.

Triangle route packet forwarded:

The firewall allowed a triangle route session to

ICMP

pass through.

Packet without a NAT table entry

The router blocked a packet that didn’t have a

blocked: ICMP

corresponding NAT table entry.

Unsupported/out-of-order ICMP:

The firewall does not support this kind of ICMP

ICMP

packets or the ICMP packets are out of order.

Router reply ICMP packet: ICMP

The router sent an ICMP reply packet to the

 

sender.

 

 

Table 80 CDR Logs

LOG MESSAGE

DESCRIPTION

board %d line %d channel %d,

The router received the setup requirements for a call.

call %d, %s C01 Outgoing Call

“call” is the reference (count) number of the call.

dev=%x ch=%x %s

“dev” is the device type (3 is for dial-up, 6 is for

 

PPPoE, 10 is for PPTP) "channel" or “ch” is the call

 

channel ID. For example,"board 0 line 0 channel 0,

 

call 3, C01 Outgoing Call dev=6 ch=0 "Means the

 

router has dialed to the PPPoE server 3 times.

 

 

board %d line %d channel %d,

The PPPoE, PPTP or dial-up call is connected.

call %d, %s C02 OutCall

 

Connected %d %s

 

board %d line %d channel %d,

The PPPoE, PPTP or dial-up call was disconnected.

call %d, %s C02 Call

 

Terminated

 

Table 81 PPP Logs

LOG MESSAGE

DESCRIPTION

ppp:LCP Starting

The PPP connection’s Link Control Protocol stage has started.

ppp:LCP Opening

The PPP connection’s Link Control Protocol stage is opening.

ppp:CHAP Opening

The PPP connection’s Challenge Handshake Authentication Protocol

 

stage is opening.

 

 

ppp:IPCP

The PPP connection’s Internet Protocol Control Protocol stage is

Starting

starting.

ppp:IPCP Opening

The PPP connection’s Internet Protocol Control Protocol stage is

 

opening.

 

 

214

 

P-660HN-T1H User’s Guide