Chapter 8 Wireless LAN
8.2.6 MAC Filter
Use this screen to change your ZyXEL Device’s MAC filter settings. Click the Edit button in the AP screen. The screen appears as shown.
Figure 48 Network > Wireless LAN > AP: MAC Address Filter
The following table describes the labels in this screen.
Table 32 Network > Wireless LAN > AP: MAC Address Filter
LABEL | DESCRIPTION |
Active MAC | Select the check box to enable MAC address filtering. |
Filter |
|
|
|
Filter Action | Define the filter action for the list of MAC addresses in the MAC Address |
| table. |
| Select Deny to block access to the ZyXEL Device. MAC addresses not listed |
| will be allowed to access the ZyXEL Device |
| Select Allow to permit access to the ZyXEL Device. MAC addresses not |
| listed will be denied access to the ZyXEL Device. |
|
|
Set | This is the index number of the MAC address. |
|
|
MAC | Enter the MAC addresses of the wireless devices that are allowed or denied |
Address | access to the ZyXEL Device in these address fields. Enter the MAC |
| addresses in a valid MAC address format, that is, six hexadecimal character |
| pairs, for example, 12:34:56:78:9a:bc. |
|
|
110 |
| |
| ||
|
|
|