ZyXEL Communications P-660HN-T1H 5.3.1Manually Assign a WPA-PSKkey

Chapter 5 Internet and Wireless Setup Wizard

Table 13 Wireless LAN Setup Wizard 2

LABEL	DESCRIPTION
Next	Click this to continue to the next wizard screen.
Exit	Click this to close the wizard screen without saving.

Note: The wireless stations and ZyXEL Device must use the same SSID, channel ID

and WEP encryption key (if WEP is enabled), WPA-PSK (if WPA-PSK is enabled) for wireless communication.

4This screen varies depending on the security mode you selected in the previous screen. Fill in the field (if available) and click Next.

5.3.1Manually Assign a WPA-PSK key

Choose Manually assign a WPA-PSK key in the Wireless LAN setup screen to set up a Pre-Shared Key.

Figure 24 Manually Assign a WPA-PSK key

The following table describes the labels in this screen.

Table 14 Manually Assign a WPA-PSK key

LABEL	DESCRIPTION
Pre-Shared	Type from 8 to 63 case-sensitive ASCII characters. You can set up the most
Key	secure wireless connection by configuring WPA in the wireless LAN screens.
	You need to configure an authentication server to do this.
Back	Click this to return to the previous screen without saving.
Next	Click this to continue to the next wizard screen.
Exit	Click this to close the wizard screen without saving.

68
	P-660HN-T1H User’s Guide