|
| Chapter 18 CWMP |
|
|
|
| Table 70 Advanced > CWMP (continued) | |
| LINK | DESCRIPTION |
| Password | The password is used to authenticate the ZyXEL Device when making a |
|
| connection to the management server. This password on the management |
|
| server and the ZyXEL Device must be the same. Type a password of up to |
|
| 255 printable characters found on an |
|
|
|
| Connection | Use this part of the screen to allow the management server to connect to |
| Request | the ZyXEL Device after a successful login. |
|
|
|
| Path | Type the IP address or domain name of the ZyXEL Device. The |
|
| management server uses this path to verify the ZyXEL Device. |
|
|
|
| Port | The default port for access to the ZyXEL Device from the management |
|
| server is the HTTP port, port 80. If you change it, make sure it does not |
|
| conflict with another port on your network and it is recommended to use a |
|
| port number above 1024 (not a commonly used port). The management |
|
| server should use this port to connect to the ZyXEL Device. You may need |
|
| to alter your NAT port forwarding rules if they were already configured. |
|
|
|
| UserName | The user name is used to authenticate the management server when |
|
| connecting to the ZyXEL Device. Type a user name of up to 255 printable |
|
| characters found on an |
|
| such as @#$%^&*()_+ are allowed. |
|
|
|
| Password | The password is used to authenticate the management server when |
|
| connecting to the ZyXEL Device. Type a password of up to 255 printable |
|
| characters found on an |
|
| allowed. |
|
|
|
| Periodic | Select Activated to have the ZyXEL Device periodically send information to |
| Inform | the management server (recommended if CWMP is enabled) or select |
|
| Deactivated to not have the ZyXEL Device periodically send information to |
|
| the management server |
|
|
|
| Interval | The interval is the duration in seconds for which the ZyXEL Device must |
|
| attempt to connect with the management server to send information and |
|
| check for configuration updates. Enter a value between 1 and 86400 |
|
| seconds. |
|
|
|
| Apply | Click this to save your changes. |
|
|
|
| Cancel | Click this to restore your previously saved settings. |
|
|
|
| 203 |
|
|