ZyXEL Communications P-660HN-T1H 14.2.1 The QoS Settings Summary Screen

	Chapter 14 Quality of Service (QoS)
Table 58 Advanced Setup > QoS
LABEL	DESCRIPTION
Type of	Select a type of service from the drop-down list box.
Service	Available options are: Normal service, Minimize delay, Maximize
	throughput, Maximize reliability and Minimize monetary cost.
DSCP Range	Specify a DSCP number between 0 and 63 in this field.
802.1p	Select a priority level (0 to 7) from the drop-down list box.
Action
IPP/DS Field	Select IPP/TOS to specify an IP precedence range and type of services.
	Select DSCP to specify a DiffServ Code Point (DSCP) range.
IP Precedence	Enter a range from 0 to 7 to re-assign IP precedence to matched traffic.
Remarking	Zero is the lowest priority and seven is the highest.
Type of	Select a type of service to re-assign the priority level to matched traffic.
Service	Available options are: Normal service, Minimize delay, Maximize
Remarking
	throughput, Maximize reliability and Minimize monetary cost.
DSCP	Specify a DSCP number between 0 and 63 to re-assign the priority level
Remarking	to matched traffic.
802.1p	Select a priority level (0 to 7) to re-assign the priority level to matched
Remarking	traffic.
Queue #	Specify a Low, Medium, High or Highest queue tag to matched traffic.
	Traffic assigned to a higher queue gets through faster while traffic in
	lower queues is dropped when there is network congestion.
ADD	Click this to add the rule.
DELETE	Click this to remove the rule.
CANCEL	Click this to restore previously saved settings.

14.2.1 The QoS Settings Summary Screen

Use this screen to display a summary of rules and actions configured for the ZyXEL Device. In the Advanced > QoS screen, click the QoS Settings Summary button to open the following screen.

Figure 85 Advanced Setup > QoS > QoS Settings Summary

	173
P-660HN-T1H User’s Guide