Chapter 3 Status Screens
Table 4 | Status Screen | |
LABEL |
| DESCRIPTION |
Status |
| This field indicates whether or not the ZyXEL Device is using the |
|
| interface. |
|
| For the DSL interface, this field displays Down (line is down), Up (line |
|
| is up or connected) if you're using Ethernet encapsulation and Down |
|
| (line is down), Up (line is up or connected), Idle (line (ppp) idle), Dial |
|
| (starting to trigger a call) and Drop (dropping a call) if you're using |
|
| PPPoE encapsulation. |
|
| For the LAN interface, this field displays Up when the ZyXEL Device is |
|
| using the interface and Down when the ZyXEL Device is not using the |
|
| interface. |
|
| For the WLAN interface, it displays Active when WLAN is enabled or |
|
| InActive when WLAN is disabled. |
|
|
|
Rate |
| For the LAN interface, this displays the port speed and duplex setting. |
|
| For the DSL interface, it displays the downstream and upstream |
|
| transmission rate. |
|
| For the WLAN interface, it displays the maximum transmission rate |
|
| when WLAN is enabled or N/A when WLAN is disabled. |
|
|
|
36 |
| |
| ||
|
|
|