Chapter 17 Universal
17.2 The UPnP Screen
Use the following screen to configure the UPnP settings on your ZyXEL Device. Click Advanced > UPnP to display the screen shown next.
See Section 17.1 on page 189 for more information.
Figure 95 Advanced > UPnP > General
The following table describes the fields in this screen.
Table 69 Advanced > UPnP > General
LABEL | DESCRIPTION |
Active the Universal Plug | Select this check box to activate UPnP. Be aware that anyone |
and Play (UPnP) Feature | could use a UPnP application to open the web configurator's |
| login screen without entering the ZyXEL Device's IP address |
| (although you must still enter the password to access the web |
| configurator). |
|
|
Allow users to make | Select this check box to allow |
configuration changes | automatically configure the ZyXEL Device so that they can |
through UPnP | communicate through the ZyXEL Device, for example by using |
| NAT traversal, UPnP applications automatically reserve a NAT |
| forwarding port in order to communicate with another UPnP |
| enabled device; this eliminates the need to manually configure |
| port forwarding for the UPnP enabled application. |
|
|
Apply | Click this to save your changes. |
|
|
Cancel | Click this to restore your previously saved settings. |
|
|
| 191 |
|
|