Chapter 12 Static Route
12.1.1 What You Can Do in the Static Route Screens
Use the Static Route screens (Section 12.2 on page 160) to view and configure IP static routes on the ZyXEL Device.
12.2 The Static Route Screen
Use this screen to view the static route rules. Click Advanced > Static Route to open the Static Route screen.
Figure 77 Advanced > Static Route
The following table describes the labels in this screen.
Table 53 Advanced > Static Route
LABEL DESCRIPTION
#This is the number of an individual static route.
Destination | This parameter specifies the IP network address of the final destination. |
| Routing is always based on network number. |
|
|
Netmask | This parameter specifies the IP network subnet mask of the final |
| destination. |
|
|
Gateway | This is the IP address of the gateway. The gateway is a router or switch |
| on the same network segment as the device's LAN or WAN port. The |
| gateway helps forward packets to their destinations. |
160 |
| |
| ||
|
|
|