Chapter 13 WISP + UR Mode

 

 

 

Table 43 Status Screen: WISP + UR Mode (continued)

LABEL

DESCRIPTION

 

- CPU Usage

This displays what percentage of the NBG4615’s processing ability is currently

 

 

used. When this percentage is close to 100%, the NBG4615 is running at full load,

 

 

and the throughput is not going to improve anymore. If you want some applications

 

 

to have more throughput, you should turn off other applications (for example,

 

 

using bandwidth management.

 

 

 

 

- Memory Usage

This shows what percentage of the heap memory the NBG4615 is using.

 

 

 

 

System Setting

 

 

 

 

 

- Firewall

This shows whether the firewall is enabled or not.

 

 

 

 

- Bandwidth

This shows whether the bandwidth management is enabled or not.

 

Management

 

 

 

 

 

- UPnP

This shows whether UPnP is enabled or not.

 

 

 

 

- Configuration Mode

This shows the web configurator mode you are viewing - Expert.

 

 

 

 

IPv6 Status

 

 

 

 

 

Item

This column shows the type of data the NBG4615 is recording.

 

 

 

 

Data

This column shows the actual data recorded by the NBG4615.

 

 

 

 

IPv6 Connection Type

This shows the type of IPv6 connection that is currently in use.

 

 

 

 

LAN IPv6 Link Local Address

This shows the NBG4615’s LAN IPv6 link local address.

 

 

 

 

Summary

 

 

 

 

 

BW MGMT Monitor

Click Details... to go to the Monitor > BW MGMT Monitor screen (Section 6.4 on

 

 

page 51). Use this screen to view the amount of network bandwidth that

 

 

applications running in the network are using.

 

 

 

 

DHCP Table

Click Details... to go to the Monitor > DHCP Table screen (Section 6.5 on page

 

 

51). Use this screen to view current DHCP client information.

 

 

 

 

Packet Statistics

Click Details... to go to the Monitor > Packet Statistics screen (Section 6.6 on

 

 

page 53). Use this screen to view port status and packet specific statistics.

 

 

 

 

Interface Status

 

 

 

 

 

Interface

This displays the NBG4615 port types. The port types are: LAN and WLAN.

 

 

 

 

Status

For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up

 

 

or connected).

 

 

For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN

 

 

is disabled.

 

 

 

 

Rate

For the LAN ports, this displays the port speed and duplex setting or N/A when the

 

 

line is disconnected.

 

 

For the WAN port, it displays the port speed and duplex setting if you’re using

 

 

Ethernet encapsulation and Idle (line (ppp) idle), Dial (starting to trigger a call)

 

 

and Drop (dropping a call) if you're using PPPoE or PPTP encapsulation. This field

 

 

displays N/A when the line is disconnected.

 

 

For the WLAN, it displays the maximum transmission rate when the WLAN is

 

 

enabled and N/A when the WLAN is disabled.

 

 

 

 

13.4.0.1 Navigation Panel

Use the menu in the navigation panel to configure NBG4615 features in WISP + UR mode.

 

103

NBG4615 User’s Guide