ZyXEL Communications wireless n gigabit netusb router WPS, WPS, Exit, LABEL, button, Register, DESCRIPTION, Wireless Security, Chapter 8 Easy Mode, information synchronization, Table 26 Wireless Security: WPS

Chapter 8 Easy Mode

8.6.7 WPS

Use this screen to add a wireless station to the network using WPS. Click WPS in the Wireless Security to open the following screen.

Figure 41 Wireless Security: WPS

The following table describes the labels in this screen.

Table 26 Wireless Security: WPS

LABEL	DESCRIPTION
Wireless Security	Click this to go back to the Wireless Security screen.
WPS	Create a secure wireless network simply by pressing a button.
	The NBG4615 scans for a WPS-enabled device within the range and performs
	wireless security information synchronization.
	Note: After you click the WPS button on this screen, you have to press a similar
	button in the wireless station utility within 2 minutes. To add the second
	wireless station, you have to press these buttons on both device and the
	wireless station again after the first 2 minutes.
Register	Create a secure wireless network simply by entering a wireless client's PIN
	(Personal Identification Number) in the NBG4615’s interface and pushing this
	button.
	Type the same PIN number generated in the wireless station’s utility. Then click
	Register to associate to each other and perform the wireless security
	information synchronization.
Exit	Click Exit to close this screen.

66
	NBG4615 User’s Guide