ZyXEL Communications wireless n gigabit netusb router Table 30 Navigation Panel: Router Mode (continued)

		Chapter 9 Router Mode
Table 30 Navigation Panel: Router Mode (continued)
LINK	TAB	FUNCTION
Wireless LAN	General	Use this screen to configure wireless LAN.
	Security	Use this screen to configure the level of wireless security for the
		NBG4615.
	MAC Filter	Use the MAC filter screen to configure the NBG4615 to block
		access to devices or block the devices from accessing the
		NBG4615.
	Advanced	This screen allows you to configure advanced wireless settings.
	QoS	Use this screen to configure Wi-Fi Multimedia Quality of Service
		(WMM QoS). WMM QoS allows you to prioritize wireless traffic
		according to the delivery requirements of individual services.
	WPS	Use this screen to configure WPS.
	WPS Station	Use this screen to add a wireless station using WPS.
	Scheduling	Use this screen to schedule the times the Wireless LAN is enabled.
	WDS	Use this screen to set up Wireless Distribution System (WDS) on
		your NBG4615.
IPv6	IPv6	Use this screen to set the IPv6 settings for your NBG4615.
WAN	Internet	This screen allows you to configure ISP parameters, WAN IP
	Connection	address assignment, DNS servers and the WAN MAC address.
	Advanced	Use this screen to configure other advanced properties.
	IGMP	Use this screen to enable IGMP snooping if you have LAN users
	Snooping	that subscribe to multicast services.
LAN	IP	Use this screen to configure LAN IP address and subnet mask.
	IP Alias	Use this screen to have the NBG4615 apply IP alias to create LAN
		subnets.
DHCP Server	General	Use this screen to enable the NBG4615’s DHCP server.
	Advanced	Use this screen to assign IP addresses to specific individual
		computers based on their MAC addresses and to have DNS
		servers assigned by the DHCP server.
NAT	General	Use this screen to enable NAT.
	Application	Use this screen to configure servers behind the NBG4615.
	Advanced	Use this screen to change your NBG4615’s port triggering
		settings.
DDNS	General	Use this screen to set up dynamic DNS.
Static Route	IP Static	Use this screen to configure IP static routes.
	Route
RIP	RIP	Use this screen to enable RIPv1 or RIPv2, which are LAN
		broadcast protocols.
Security
Firewall	General	Use this screen to activate/deactivate the firewall.
	Services	This screen shows a summary of the firewall rules, and allows you
		to edit/add a firewall rule.
Content Filter	Content Filter	Use this screen to block certain web features and sites containing
		certain keywords in the URL.
Management

	73
NBG4615 User’s Guide