Chapter 27 Remote Management

27.3 WWW Screen

To change your NBG4615’s remote management settings, click Management > Remote Management > WWW.

Figure 129 Management > Remote Management > WWW

The following table describes the labels in this screen.

Table 83 Management > Remote Management > WWW

LABEL

DESCRIPTION

Server Port

You may change the server port number for a service if needed, however

 

you must use the same port number in order to use that service for

 

remote management.

 

 

Server Access

Select the interface(s) through which a computer may access the

 

NBG4615 using this service.

 

 

Secured Client IP

Select All to allow all computes to access the NBG4615.

Address

Otherwise, check Selected and specify the IP address of the computer

 

 

that can access the NBG4615.

 

 

Apply

Click Apply to save your customized settings and exit this screen.

 

 

Cancel

Click Cancel to begin configuring this screen afresh.

 

 

204

 

NBG4615 User’s Guide