ZyXEL Communications wireless n gigabit netusb router SSID, Apply, Status, Status, Cancel, Release, Security, WPS Setup, Enable WPS, PIN Number, 802.11 Mode, the NBG4615, Configuration, generate a new PIN number

Chapter 15 Wireless LAN

Note: With WPS, wireless clients can only connect to the wireless network using the first SSID on the NBG4615.

Figure 87 Network > Wireless LAN > WPS

The following table describes the labels in this screen.

Table 52 Network > Wireless LAN > WPS

LABEL	DESCRIPTION
WPS Setup
Enable WPS	Select this to enable the WPS feature.
PIN Number	This displays a PIN number last time system generated. Click Generate to
	generate a new PIN number.
Status
Status	This displays Configured when the NBG4615 has connected to a wireless
	network using WPS or when Enable WPS is selected and wireless or wireless
	security settings have been changed. The current wireless and wireless security
	settings also appear in the screen.
	This displays Unconfigured if WPS is disabled and there are no wireless or
	wireless security changes on the NBG4615 or you click Release_Configuration
	to remove the configured wireless and wireless security settings.
Release	This button is only available when the WPS status displays Configured.
Configuration	Click this button to remove all configured wireless and wireless security settings
	for WPS connections on the NBG4615.
802.11 Mode	This is the 802.11 mode used. Only compliant WLAN devices can associate with
	the NBG4615.
SSID	This is the name of the wireless network (the NBG4615’s first SSID).
Security	This is the type of wireless security employed by the network.
Apply	Click Apply to save your changes back to the NBG4615.
Cancel	Click Cancel to reload the previous configuration for this screen.

138
	NBG4615 User’s Guide