Manuals / Brands / Computer Equipment / Network Router / ZyXEL Communications / Computer Equipment / Network Router

ZyXEL Communications wireless n gigabit netusb router LAN, IP Alias, Network > LAN > IP

1 360

Download 360 pages, 8.14 Mb

Chapter 18 LAN

18.4 LAN IP Screen

Use this screen to change the IP address for your NBG4615. Click Network > LAN > IP. Figure 104 Network > LAN > IP

The following table describes the labels in this screen.

Table 64 Network > LAN > IP

LABEL	DESCRIPTION
IP Address	Type the IP address of your NBG4615 in dotted decimal notation.

IP Subnet Mask	The subnet mask specifies the network number portion of an IP address. Your
	NBG4615 will automatically calculate the subnet mask based on the IP address
	that you assign. Unless you are implementing subnetting, use the subnet mask
	computed by the NBG4615.

Apply	Click Apply to save your changes back to the NBG4615.

Cancel	Click Cancel to begin configuring this screen afresh.

18.5 IP Alias Screen

Use this screen to have the NBG4615 apply IP alias to create LAN subnets. Click LAN > IP Alias. Figure 105 Network > LAN > IP Alias

The following table describes the labels in this screen.

Table 65 Network > LAN > IP Alias

LABEL	DESCRIPTION
IP Alias	Check this to enable IP alias.

IP Address	Type the IP alias address of your NBG4615 in dotted decimal notation.

	165
NBG4615 User’s Guide	165

Contents

IP Address http://192.168.1.1 Password Copyright © ZyXEL Communications Corporation Page About This User's Guide When reading a ZyXEL User’s Guide On-Screen,keep the following in mind: Embedded hyperlinks are actually •Quick Start Guide •Support Disc bold Maintenance > Log > Log Setting Log Log Setting Page Safety Warnings Contents Overview Page About This User's Guide Document Conventions Contents Overview Table of Contents Chapter Introducing the Web Configurator NBG4615 Modes Easy Mode 8.6.1 Game Engine 8.6.2 Power Saving 8.6.3 Content Filter 8.6.4 Bandwidth MGMT 8.6.5 Firewall Connecting the NBG4615 (in Universal Repeater Mode) to an AP or Wireless Router Page 20.5.1 NATPort Forwarding: Services and Port Numbers 26.5.1 Rule Configuration: Application Rule Configuration 26.5.2 Rule Configuration: User Defined Service Rule Configuration 28.4.1 Using UPnP in Windows XP Example 28.4.2 Web Configurator Easy Access H Open Software Announcements Page Page Page Wired Wireless NetUSB Figure LAN WAN USB WLAN/WPS Table 1 Front panel LEDs and WPS button (continued) For more information on using WPS, see Section 14.2 on page 2Connect a USB device to the USB port on the NBG4615 To install the ZyXEL NetUSB Share Center Utility: 1Insert the disc that came with your NBG4615 into your computer’s disc drive Run the Setup Page The following table describes the icons in this window Table 2 ZyXEL NetUSB Share Center Utility Main Window Icons ICONDESCRIPTION Configure Server Chapter 5 on page The following table describes the menus in this screen Table 3 ZyXEL NetUSB Share Center Utility Main Screen Menus MENU ITEM Note: If the computer is connecting to the You can open it by clicking the Tools > Configuration menu command Figure 4 ZyXEL NetUSB Share Center Utility Configuration Window The following table describes the labels in this window Table 4 ZyXEL NetUSB Share Center Utility Configuration Window LABEL System > Exit Exit Page Language Connect to Internet Figure 6 Welcome L2TP Figure 8 Internet Connection Type CONNECTION TYPE Internet Connection Type Figure 9 Internet Connection Type: DHCP Next Back Figure 10 Internet Connection Type: Static IP Table 7 Internet Connection Type: Static IP (continued) Figure 11 Internet Connection Type: PPPoE Table 8 Internet Connection Type: PPPoE PPPoE Refer to the appendix for more information on PPTP The NBG4615 supports one PPTP server connection at any given time Figure 12 Internet Connection Type: PPTP The following table describes the fields in this screen Table 9 Internet Connection Type: PPTP Figure 13 Internet Connection Type: L2TP Table 10 Internet Connection Type: L2TP L2TP Table 10 Internet Connection Type: L2TP (continued) The NBG4615 connects to the Internet Figure 14 Connecting to the Internet Page Table 11 Wireless Security: No Security Wireless Network LAN Name (SSID) Easy Mode Chapter 4 on page Chapter 5 Introducing the Web Configurator The Web Configurator initially displays the following login screen Figure 19 Login screen Table 13 Login screen Type "1234" (default) as the password Administrator Inactivity Timer Logout Home Table 15 Home Screen (continued) LABEL DESCRIPTION Section 5.2.3.2 on page Section 29.5 on page Click the icon to change the Weather display RESET Page Expert Mode open all Summary Use the Section 6.3 on page View Log Display Log Settings Clear Figure 24 View Log The bandwidth is measured in kilobytes per second (kbps) Figure 26 Summary: BW MGMT Monitor DHCP Table (Details...) MAC Address, IP Address Expiration time Figure 27 Summary: DHCP Table Table 18 Summary: DHCP Table #This is the index number of the host computer Packet Statistics (Details...) Poll Interval(s) Figure 28 Summary: Packet Statistics Table 19 Summary: Packet Statistics Poll WLAN Station Status (Details...) Association List Web Configurator mode Device mode Easy Access Point WISP Chapter 7 NBG4615 Modes The menu for changing device modes is available in Expert mode only Note: Choose your Device Mode carefully to avoid having to change it later Page Chapter 8 Easy Mode Click Status to open the following screen Figure 31 Easy Mode: Status Screen You can do the following in this mode: Use this Section 8.6 on page The features configurable in Easy Mode are shown in the Control Panel Figure 34 Control Panel OFF Table 22 Control Panel OFF Game Console Bandwidth Mgmt Table 23 Power Saving WLAN Status Select On or Off to specify whether the Wireless LAN is turned on or off conjunction with the Day and For the following times fields Day Page High Low Cancel Figure 38 Bandwidth MGNT Figure 39 Firewall Figure 40 Wireless Security Network Name (SSID) the wireless LAN Select WPA-PSK or WPA2-PSK to add security on this wireless network. The Figure 41 Wireless Security: WPS Table 26 Wireless Security: WPS Click this to go back to the Wireless Security screen Create a secure wireless network simply by pressing a button wireless security information synchronization Table 27 Status Screen in Easy Mode Maintenance > General LAN1 LAN4 Modem Status Chapter 9 Router Mode Click to open the status screen Figure 44 Status Screen: Router Mode The following table describes the icons shown in the Status screen Table 28 Status Screen Icon Key: Router Mode Table 28 Status Screen Icon Key: Router Mode (continued) Monitor Maintenance Router Mode Client Table 29 Status Screen: Router Mode (continued) System Status Item This column shows the type of data the NBG4615 is recording Data Use the sub-menuson the navigation panel to configure NBG4615 features Figure 45 Navigation Panel: Router Mode The following table describes the sub-menus Table 30 Navigation Panel: Router Mode LINK Table 30 Navigation Panel: Router Mode (continued) MAINTENANCE Page Maintenance > Sys OP Mode > General Access Point mode Start > Run Section on page to open the Status screen Status Screen: Access Point Mode Access Point Mode None Chapter 10 Access Point Mode Table 31 Status Screen: Access Point Mode (continued) using bandwidth management This displays the NBG4615 port types. The port types are: LAN and WLAN Navigation Network > LAN The table below describes the labels in the screen Table 32 Network > LAN > IP User Defined Page Wireless LAN > AP Client Ignore Maintenance > Sys OP Mode Page The following table describes the labels shown in the Status screen Table 33 Status Screen: Universal Repeater Mode Universal Repeater Mode WLAN OP Mode wireless LAN is set - Universal Repeater Mode Table 33 Status Screen: Universal Repeater Mode (continued) Configuration Mode For the LAN ports, this displays the port speed or N/A when the line is disconnected Figure 56 Menu: Universal Repeater Mode Wireless LAN > General Universal Repeater Parameters Enable Select this option to have the NBG4615 connect to the specified access point SSID Table 35 Universal Repeater Mode: Wireless LAN > Universal Repeater: Static WEP Select Static WEP if the access point to which you want to connect uses WEP data encryption Encryption Type Select Open or Shared Key from the drop-downlist box Table 36 Universal Repeater Mode: Wireless LAN > Universal Repeater: WPA(2)-PSK uses WPA-PSKor WPA2-PSK want to connect Pre-SharedKey Click Reset to reload the previous configuration for this screen Monitor WISP Mode Page Table 37 Status Screen: WISP Mode (continued) WISP Mode wireless LAN is set - WISP Mode - Connect Status point - Associated or Disassociated displays N/A when the line is disconnected Configuration > Wireless LAN > General Figure 65 WISP Mode: Wireless LAN > General Table 38 WISP Mode: Wireless LAN > General WISP Parameters Selection Table 39 No Security (WISP) (continued) Table 40 WEP (WISP) Select Static WEP to enable data encryption PassPhrase Enter a Passphrase (up to 26 printable characters) and click Generate Table 40 WEP (WISP) (continued) Key 1 to Key The WEP keys are used to encrypt data. Both the NBG4615 and the wireless stations must use the same WEP key for data transmission characters ("0-9", "A-F") Configuration > Site Survey Figure 69 Configuration > Wireless LAN > Site Survey (WISP) Table 42 Configuration > Wireless LAN > Site Survey (WISP) Station Site Survey you can add the selected wireless device to a profile and then enable it Page Page WISP + UR Mode Mode Table 43 Status Screen: WISP + UR Mode WISP + UR Mode Table 43 Status Screen: WISP + UR Mode (continued) Page This chapter provides tutorials for setting up your NBG4615 •Set Up a Wireless Network with WPS •Configure Wireless Security without WPS •Using Multiple SSIDs on the NBG4615 Connecting the NBG4615 (in Universal Repeater Mode) to an AP or Wireless Router Chapter 14 Tutorials Log into NBG4615’s Web Configurator and press the Push Button Configuration > Network > Wireless Client > WPS Station Figure 75 Example WPS Process: PBC Method WPS Station Wireless Client Follow the steps below to configure the wireless settings on your NBG4615 1Make sure the WLAN switch (at the back panel of the NBG4615) is set to ON Open the 3Confirm that the status of wireless LAN is ON Enter Interface Status Start > Programs Connect Confirm Save Save http://www.zyxel.com Network > Wireless LAN > General SSID_Worker SSID_VoIP SSID_Guest SSID SECURITY TYPE Configuration > Network > Wireless LAN > General Enable Intra-BSS Traffic SSID_Worker SSID_Guest SSID_VoIP MAC Filter Allow Policy Add a station Mac Address Page Wireless LAN > General Summary Monitor > WLAN Station Status ZyXEL NetUSB Sharing Center Utility Disconnect Request to Connect Accept Exit Chapter 3 on page Install the ZyXEL NetUSB Share Center Utility to your computer. See 2Connect a USB printer to one of the USB ports of the NBG4615 Connect menu and select from the menu Page Page Page Page Chapter 15 Wireless LAN Section 15.5 on page QoS Section 15.6 on page Section 15.7 on page •In the AP: this feature is called a local user database or a local database •In a RADIUS server: this is a server used in businesses more than in homes page Table 44 Types of Encryption for Each Type of Authentication NO AUTHENTICATION WPA Apply Figure 78 Guest Wireless LAN Network 600 kbps 300 kbps 100 kbps Click Network > Wireless LAN to open the General screen The following table describes the general wireless LAN labels in this screen Table 45 Network > Wireless LAN > General Name(SSID) on a typical English language keyboard) for the wireless LAN the NBG4615. This allows you to use one access point to provide several BSSs Figure 81 Network > Wireless LAN > Security: No Security Table 46 Network > Wireless LAN > Security: No Security Select Static WEP from the Security Mode list from the list Figure 82 Network > Wireless LAN > Security: Static WEP converted by the NBG4615 into a complicated string that is referred to as the Table 47 Network > Wireless LAN > Security: Static WEP (continued) Select WPA-PSK or WPA2-PSK from the Security Mode list Figure 83 Network > Wireless LAN > Security: WPA-PSK/WPA2-PSK Table 48 Network > Wireless LAN > Security: WPA-PSK/WPA2-PSK Security Mode Figure 84 Network > Wireless LAN > MAC Filter The following table describes the labels in this menu Table 49 Network > Wireless LAN > MAC Filter Access Policy Select the SSID for which you want to configure MAC filtering Click Network > Wireless LAN > Advanced. The screen appears as shown Figure 85 Network > Wireless LAN > Advanced Table 50 Network > Wireless LAN > Advanced RTS/CTS Threshold Page Figure 87 Network > Wireless LAN > WPS Table 52 Network > Wireless LAN > WPS WPS Setup Enable WPS Select this to enable the WPS feature Push Button Figure 88 Network > Wireless LAN > WPS Station Table 53 Network > Wireless LAN > WPS Station Push Button configure wireless stations’s wireless settings Or input station’s Use this button when you use the PIN Configuration method to configure PIN number Network Wireless LAN Scheduling Figure 89 Network > Wireless LAN > Scheduling Table 54 Network > Wireless LAN > Scheduling AP + Bridge Bridge Basic Setting Disabled Figure 90 Network > Wireless LAN > WDS Table 55 Network > Wireless LAN > WDS (continued) Remote MAC bridge connection with You can connect to up to 4 peer devices EncrypType Page Network > IPv6 IPv6 Ethernet Figure 91 Network > IPv6: Ethernet The following table describes the fields in this screen Table 56 Network > IPv6: Ethernet Table 56 Network > IPv6: Ethernet (continued) DHCPv6 Figure 92 Network > IPv6: DHCPv6 Table 57 Network > IPv6: DHCPv6 From ISP Link-local only LAN IPv6 Page Figure 94 LAN and WAN Internet Connection Section 17.4 on page Section 17.5 on page Use Chapter 17 WAN The NBG4615 can get the DNS server addresses in the following ways Factory Default Otherwise, click Figure 95 Multicast Example IGMP-v1 IGMP-v2 This screen displays when you select Ethernet encapsulation Figure 96 Network > WAN > Internet Connection: Ethernet Encapsulation Table 58 Network > WAN > Internet Connection: Ethernet Encapsulation ISP Parameters for Internet Access Encapsulation PPP over Ethernet This screen displays when you select PPPoE encapsulation Figure 97 Network > WAN > Internet Connection: PPPoE Encapsulation Table 59 Network > WAN > Internet Connection: PPPoE Encapsulation PPP over Ethernet Nailed-Up Table 59 Network > WAN > Internet Connection: PPPoE Encapsulation (continued) Get automatically from ISP My WAN IP This screen displays when you select PPTP encapsulation Figure 98 Network > WAN > Internet Connection: PPTP Encapsulation Table 60 Network > WAN > Internet Connection: PPTP Encapsulation LABELDESCRIPTION Table 60 Network > WAN > Internet Connection: PPTP Encapsulation (continued) Address This screen displays when you select L2TP encapsulation Figure 99 Network > WAN > Internet Connection: L2TP Encapsulation Table 61 Network > WAN > Internet Connection: L2TP Encapsulation Table 61 Network > WAN > Internet Connection: L2TP Encapsulation (continued) Use this screen to enable Multicast and enable Auto-bridge Note: The categories shown in this screen are independent of each other Figure 100 Network > WAN > Advanced Table 62 Network > WAN > Advanced IGMPv1/v2 Network > WAN > IGMP Snooping Page Figure 102 LAN Example Page Network > LAN > IP Table 65 Network > LAN > IP Alias (continued) DHCP Client List Chapter 19 DHCP Server DHCP Server Figure 106 Network > DHCP Server > General Table 66 Network > DHCP Server > General Page Table 67 Network > DHCP Server > Advanced (continued) Apply computer on the LAN sends a DNS query to the NBG4615, the NBG4615 select DNS Relay for a second or third DNS server, that choice changes to None after you click Apply FTP, Telnet, SNMP Ports 21 to Port Chapter 20 NAT Section 20.5.3 on page NAT Definitions Figure 109 How NAT Works Network > NAT Figure 110 Network > NAT > General Table 69 Network > NAT > General NAT Setup Enable Network Translation local network) to a different IP address known within another network (for Table 70 Network > NAT > Application Add Application Rule Active Select the check box to enable this rule and the requested service can be forwarded to the host with a specified internal IP address Network > NAT > Advanced Note: Only one LAN computer can use a trigger port (range) at a time Figure 112 Network > NAT > Advanced Table 71 Network > NAT > Advanced This is the rule index number (read-only) Figure 113 Multiple Servers Behind NAT Example The following is an example of trigger port forwarding Figure 114 Trigger Port Forwarding Process: Example 1Jane requests a file from the Real Audio server (port 7070) 3The Real Audio server responds using a port number ranging between 4The NBG4615 forwards the traffic to Jane’s computer IP address Page Chapter 21 DDNS Network > DDNS Table 72 Dynamic DNS Page Chapter 22 Static Route Click Network > Static Route to open the IP Static Route screen Figure 117 Network > Static Route Table 73 Network > Static Route Static Routing Settings Network > RIP Chapter 23 RIP Services Chapter 24 Firewall General Firewall Enable Firewall 1Change the default password via Web Configurator 6Protect against IP spoofing by making sure the firewall is active 7Keep the firewall in a secured (locked) room Figure 120 Security > Firewall > General l Table 75 Security > Firewall > General Enable Firewall Table 76 Security > Firewall > Services ICMP Internet Control Message Protocol is a message control and error-reporting protocol between a host server and a gateway to the Internet. ICMP uses software and directly apparent to the application user Chapter 24 Firewall Table 76 Security > Firewall > Services (continued) Protocol which you want to apply the firewall rule Dest Port Range www.zyxel.com.tw/news/pressroom.php www.zyxel.com.tw news/pressroom.php Chapter 25 Content Filtering Figure 122 Security > Content Filter Table 77 Security > Content Filter Trusted IP Setup content filtering Page Page Page ->VOIP ->FTP ->HTTP ->Chat, Email Upstream Bandwidth Bandwidth Management Advanced Downstream Bandwidth Management > Bandwidth MGMT Page Table 79 Management > Bandwidth Management > Advanced (continued) Application List This is the number of an individual bandwidth management rule Priority Select a priority from the drop down list box. Choose High, Mid or Low Application List Figure 126 Bandwidth Management Rule Configuration: Application List Table 80 Bandwidth Management Rule Configuration: Application List Select an interface’s check box to enable bandwidth management on that interface User-defined Service Figure 127 Bandwidth Management Rule Configuration: User-definedService Table 81 Bandwidth Management Rule Configuration: User-definedService The bandwidth is measured in kilobits per second (kbps) Figure 128 Management > Bandwidth Management > Monitor Management Bandwidth Management Table 82 Media Bandwidth Management Setup: Services Table 82 Media Bandwidth Management Setup: Services (continued) VoIP (SIP) Initiated Protocol (SIP) is an internationally recognized standard for handles the setting up, altering and tearing down of voice and multimedia sessions over the Internet This chapter provides information on the Remote Management screens •LAN and WAN •LAN only •WAN only Note: The NBG4615 is managed using the Web Configurator Chapter 27 Remote Management Management > Remote Management > WWW Figure 129 Management > Remote Management > WWW Table 83 Management > Remote Management > WWW All This chapter introduces the UPnP feature in the web configurator •Dynamic port mapping •Learning public IP addresses •Assigning lease times to mappings See the NAT chapter for more information on NAT Management > UPnP start Network Connections Properties Internet Connection Properties Settings Page 1Click Start and then Control Panel 2Double-click Network Connections 3Select My Network Places under Other Places Local Network Invoke Page Page Firmware Upgrade Backup/Restore Reset/Restart Chapter 29 Maintenance Table 85 Maintenance > General System Setup System Name System Name is a unique name to identify the NBG4615 in an Ethernet Page Table 87 Maintenance > Time (continued) First Sunday April Last www.zyxel.com Maintenance > Firmware Upgrade Figure 143 Maintenance > Firmware Upgrade Table 88 Maintenance > Firmware Upgrade File Path Return Maintenance > Backup/Restore Figure 145 Maintenance > Backup/Restore Maintenance > Backup/Restore Backup Table 89 Maintenance > Backup/Restore (continued) Click Upload to begin the upload process in this time causing a temporary network disconnect If you see an error screen, click Back to return to the Backup/Restore screen Pressing the Reset button in this section clears all user-entered Page Wireless Client Table 90 Maintenance > Sys OP Mode (continued) Mode Router The NBG4615 does not turn on. None of the LEDs turn on One of the LEDs does not behave as expected I don’t know the IP address of my NBG4615 cmd ipconfig Default Gateway LAN information If you changed the IP address I don’t know the IP address of my NBG4615 Make sure your Internet browser does not block Appendix B on page Section 5.3.1 on page I cannot access the Internet Disable The Internet connection is slow or intermittent 3Reboot the NBG4615 Advanced Suggestion You will lose all of your changes when you push the RESET button To reset the NBG4615: 1Make sure the wireless LAN is enabled on the NBG4615 Enable URL Keyword Blocking Keyword List I can access the Internet, but I cannot open my network folders I cannot access the Web Configurator after I switched to AP mode I cannot access or see a USB device that is connected to the NBG4615 What kind of USB devices do the NBG4615 support I cannot install the ZyXEL Share Center Utility Page Page The following tables summarize the NBG4615’s hardware and firmware features Table 91 Hardware Features Appendix A Product Specifications Table 92 Firmware Features FEATURE Note: The NBG4615 may be prone to RF (Radio Frequency) interference from other 2.4 GHz devices such as microwave Page Page Tools Pop-up Blocker Turn Off Privacy Block pop-ups 2Select Settings…to open the Pop-upBlocker Settings screen Allowed sites Close Custom Level Scripting Active scripting Scripting of Java applets Microsoft VM Java permissions 2Make sure that Use Java 2 for <applet> under Java (Sun) is selected Figure 161 Java (Sun) Tools Options Content Preferences Choose how you prefer to handle Open all JavaScript Options Page Page Appendix C IP Addresses and Subnetting Figure 167 Network Number and Host ID Table 93 IP Address Network Number and Host ID Example 1ST OCTET: 2ND Table 94 Subnet Masks BINARY 1ST DECIMAL OCTET Page Table 97 Subnet IP/SUBNET MASK NETWORK NUMBER LAST OCTET BIT VALUE Table 97 Subnet 1 (continued) Table 98 Subnet Table 99 Subnet Table 100 Subnet The following table shows IP address last octet values for each subnet Eight Subnets SUBNET FIRST ADDRESS LAST Table 103 16-bitNetwork Number Subnet Planning (continued) •10.0.0.0 — •172.16.0.0 — •192.168.0.0 — Page Page Page 1Click Start > Control Panel 2In the Control Panel, click the Network Connections icon Page 5The Internet Protocol TCP/IP Properties window opens Obtain an IP address automatically 7Click OK to close the Internet Protocol (TCP/IP) Properties window 8Click OK to close the Local Area Connection Properties window 1Click Start > All Programs > Accessories > Command Prompt Page Continue 6Select Internet Protocol Version 4 (TCP/IPv4) and then select Properties 7The Internet Protocol Version 4 (TCP/IPv4) Properties window opens 9Click OK to close the Internet Protocol (TCP/IP) Properties window 10Click OK to close the Local Area Connection Properties window Page Page 5Select Internet Protocol Version 4 (TCP/IPv4) and then select Properties 6The Internet Protocol Version 4 (TCP/IPv4) Properties window opens 8Click OK to close the Internet Protocol (TCP/IP) Properties window 9Click OK to close the Local Area Connection Properties window 1Click Apple > System Preferences System Preferences Built-in Configure Using DHCP Configure IPv4 TCP/IP Manually Subnet Mask Applications > Utilities > Network Utilities Network Interface Info 2In System Preferences, click the Network icon Configure Page Network interface Note: Make sure you are logged in as the root administrator 1Click System > Administration > Network Network Settings Unlock Authenticate Static IP address IP address Subnet mask Gateway address DNS System > Administration > Network Tools Network device Devices Interface Statistics 1Click K Menu > Computer > Administrator Settings (YaST) Run as Root - KDE su YaST Control Center Network Devices Network Card Overview Network Card Setup Dynamic Address (DHCP) Statically assigned IP Address Hostname Hostname/DNS Finish KNetwork Manager Task bar Show Connection Information Page This section discusses ad-hocand infrastructure wireless LAN topologies Figure 179 Peer-to-PeerCommunication in an Ad-hocNetwork Page Figure 181 Infrastructure WLAN Figure 182 RTS/CTS RTS/CTS RTS/CTS Fragmentation Threshold Fragmentation Threshold Table 104 IEEE 802.11g DATA RATE (MBPS) MODULATION Table 105 Wireless Security Levels SECURITY LEVEL •User based identification that allows for roaming •Authentication •Access-Request Sent by an access point requesting authentication •Access-Reject Sent by a RADIUS server rejecting access •Access-Accept Page Note: EAP-MD5cannot be used with Dynamic WEP Key Exchange Table 106 Comparison of EAP Authentication Types EAP-MD5 EAP-TLS EAP-TTLS Page Page AUTHENTICATION ENCRYPTIO ENTER METHOD/ KEY IEEE There are two types of antennas used for wireless LAN applications Omni-directional Page USER-DEFINED Port(s Port(s) •If the Protocol is TCP, UDP, or TCP/UDP, this is the IP port number •If the Protocol is USER, this is the IP protocol number Appendix F Common Services Table 108 Commonly Used Services (continued) Page Page Page MULTICAST ADDRESS Table 111 Reserved Multicast Address (continued) EUI-64 Renew Rebind to S1 to S2 Neighbor advertisement: A response from a node to announce its MLD filtering controls which multicast groups a port can join All Programs Dibbler-DHCPv6 Client Install as service 3Select Start > Control Panel > Administrative Tools > Services 4Double click Dibbler - a DHCPv6 client 1Select Control Panel > Network and Sharing Center > Local Area Connection 2Select the Internet Protocol Version 6 (TCP/IPv6) checkbox to enable it 4Click Close to exit the Local Area Connection Status screen 5Select Start > All Programs > Accessories > Command Prompt End-UserLicense Agreement for "NBG4615 1.Grant of License for Personal Use 2.Ownership 3.Copyright Appendix H Open Software Announcements 4.Restrictions 5.Confidentiality 6.No Warranty THE SOFTWARE IS PROVIDED "AS IS." TO THE MAXIMUM EXTENT PERMITTED BY LAW, ZyXEL 7.Limitation of Liability 8.Export Restrictions 9.Audit Rights 10.Termination 11.General Notice GNU GENERAL PUBLIC LICENSE Version 2, June Copyright (C) 1989, 1991 Free Software Foundation, Inc 59 Temple Place - Suite 330, Boston, MA 02111-1307,USA TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION Page Page NO WARRANTY END OF TERMS AND CONDITIONS This Product includes curl software under below license COPYRIGHT AND PERMISSION NOTICE Copyright (c) 1996 - 2007, Daniel Stenberg, <daniel@haxx.se Page 1.2"GoAhead" means Go Ahead Software, Inc 1.4"License" or "Agreement" means this document 2. Source Code License 2.1 Limited Source Code Grant 2.2 Binary Code 2.3 License Back to GoAhead 2.4 Restrictions on Use 3. Term 4.Trademarks and Brand 4.2 Promotion by You of GoAhead WebServer Mark product 4.3 Placement of Copyright Notice by You year is not supplied with Documentation, GoAhead will supply it upon request 4.4 No Modifications to Server Identification Field Page Page Page Page Exhibit A GoAhead Trademarks, Logos, and Product Designation Information 01/28/00 This Product includes LLTD software under below license This Product includes ntpclient software under below license Page Page Page Page Page * [including the GNU Public Licence.] This Product includes ppp software under below license Copyrights: The BSD license Copyright (c) <YEAR>, <OWNER Page Page Page Page Version 2.1, February Copyright (C) 1991, 1999 Free Software Foundation, Inc 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed Page Page Page Page Page Page Copyright © 2011 by ZyXEL Communications Corporation Published by ZyXEL Communications Corporation. All rights reserved •This device may not cause harmful interference Page This Class B digital apparatus complies with Canadian ICES-003 Cet appareil numérique de la classe B est conforme à la norme NMB-003du Canada 1Go to http://www.zyxel.com 2Select your product on the ZyXEL home page to go to that product's page 3Select the certification you wish to view from this page WARNING: 1Grant of License for Personal Use 2Ownership 3Copyright 4Restrictions 5Confidentiality 6No Warranty 7Limitation of Liability 8Export Restrictions 9Audit Rights 10Termination 11General Page Page 70, 79, 85 126 71, 79, 85, 93 menu 80, 86, 94 160 Page Link type 71, 79, 86, 94 SSID 65, 70, 79, 85, 93, 102, 126 WWW201