ZyXEL Communications wireless n gigabit netusb router Apply, Apply, Cancel, Cancel, network, System Name, Domain Name, System Setup, Old Password, New Password, Administrator, Password Setup, Inactivity Timer

Chapter 29 Maintenance

The following table describes the labels in this screen.

Table 85 Maintenance > General

LABEL	DESCRIPTION
System Setup
System Name	System Name is a unique name to identify the NBG4615 in an Ethernet
	network.
Domain Name	Enter the domain name you want to give to the NBG4615.
Administrator	Type how many minutes a management session can be left idle before the
Inactivity Timer	session times out. The default is 5 minutes. After it times out you have to log in
	with your password again. Very long idle timeouts may have security risks. A
	value of "0" means a management session never times out, no matter how long
	it has been left idle (not recommended).
Apply	Click Apply to save your changes back to the NBG4615.
Cancel	Click Cancel to begin configuring this screen afresh.

29.4 Password Screen

It is strongly recommended that you change your NBG4615's password.

If you forget your NBG4615's password (or IP address), you will need to reset the device. See Section 29.8 on page 219 for details.

Click Maintenance > Password. The screen appears as shown.Figure 141 Maintenance > Password

The following table describes the labels in this screen.

Table 86 Maintenance > Password

LABEL	DESCRIPTION
Password Setup	Change your NBG4615’s password (recommended) using the fields as shown.
Old Password	Type the default password or the existing password you use to access the
	system in this field.
New Password	Type your new system password (up to 30 characters). Note that as you type
	a password, the screen displays an asterisk (*) for each character you type.
Retype to Confirm	Type the new password again in this field.
Apply	Click Apply to save your changes back to the NBG4615.
Cancel	Click Cancel to begin configuring this screen afresh.

214
	NBG4615 User’s Guide