ZyXEL Communications wireless n gigabit netusb router PIN number, Push Button, Push Button, synchronization, Or input station’s, information synchronization, wireless station’s wireless settings

Chapter 15 Wireless LAN

15.8 WPS Station Screen

Use this screen when you want to add a wireless station using WPS. To open this screen, click Network > Wireless LAN > WPS Station tab.

Note: After you click Push Button on this screen, you have to press a similar button in the wireless station utility within 2 minutes. To add the second wireless station, you have to press these buttons on both device and the wireless station again after the first 2 minutes.

Figure 88 Network > Wireless LAN > WPS Station

The following table describes the labels in this screen.

Table 53 Network > Wireless LAN > WPS Station

LABEL	DESCRIPTION
Push Button	Use this button when you use the PBC (Push Button Configuration) method to
	configure wireless stations’s wireless settings.
	Click this to start WPS-aware wireless station scanning and the wireless security
	information synchronization.
Or input station’s	Use this button when you use the PIN Configuration method to configure
PIN number	wireless station’s wireless settings.
	Type the same PIN number generated in the wireless station’s utility. Then click
	Start to associate to each other and perform the wireless security information
	synchronization.

	139
NBG4615 User’s Guide