ZyXEL Communications wireless n gigabit netusb router SSID, SSID, Apply, Cancel, Channel, Channel, Selection, Selection, interference, interference, Security Mode, Security Mode, WISP Parameters, WISP Parameters

Chapter 12 WISP Mode

12.5 Wireless LAN General Screen

Use this screen to configure the wireless LAN settings of your NBG4615. Go to Configuration > Wireless LAN > General to open the following screen.

Figure 65 WISP Mode: Wireless LAN > General

The following table describes the labels in this screen.

Table 38 WISP Mode: Wireless LAN > General

LABEL	DESCRIPTION
WISP Parameters
SSID	Enter the name of the access point to which you are connecting.
Channel	The range of radio frequencies used by IEEE 802.11b/g/n wireless devices is called
Selection	a channel. The device will automatically select the channel with the least
	interference.
Security Mode	Select the security mode of the access point to which you want to connect.
Apply	Click Apply to save your changes back to the NBG4615.
Cancel	Click Cancel to reload the previous configuration for this screen.

12.5.0.1 No Security

Use this screen if the access point to which you want to connect does not use encryption. Figure 66 No Security (WISP)

The following table describes the labels in this screen.

Table 39 No Security (WISP)

LABEL	DESCRIPTION
WISP Parameters
SSID	Enter the name of the access point to which you are connecting.
Channel	The range of radio frequencies used by IEEE 802.11b/g/n wireless devices is called
Selection	a channel. The device will automatically select the channel with the least
	interference.
Security Mode	Select No Security in this field.

	95
NBG4615 User’s Guide