ZyXEL Communications wireless n gigabit netusb router Edit, Apply, Apply, Enable, Cancel, Advanced, Protocol, interface, Direction, Bandwidth, Source Port, and specify the, Application List, Destination Port

Chapter 26 Bandwidth Management

26.5.1 Rule Configuration: Application Rule Configuration

If you want to edit a bandwidth management rule for a pre-defined service or application, click the Edit icon in the Application List table of the Advanced screen. The following screen displays.

Figure 126 Bandwidth Management Rule Configuration: Application List

The following table describes the labels in this screen.

Table 80 Bandwidth Management Rule Configuration: Application List

LABEL	DESCRIPTION
#	This is the number of an individual bandwidth management rule.
Enable	Select an interface’s check box to enable bandwidth management on that
	interface.
Direction	These read-only labels represent the physical interfaces. Bandwidth
	management applies to all traffic flowing out of the router through the interface,
	regardless of the traffic’s source.
	Traffic redirect or IP alias may cause LAN-to-LAN traffic to pass through the
	NBG4615 and be managed by bandwidth management.
Bandwidth	Select Maximum Bandwidth or Minimum Bandwidth and specify the
	maximum or minimum bandwidth allowed for the rule in kilobits per second.
Destination Port	This is the port number of the destination that define the traffic type, for
	example TCP port 80 defines web traffic.
	See Appendix F on page 301 for some common services and port numbers.
Source Port	This is the port number of the source that define the traffic type, for example
	TCP port 80 defines web traffic.
	See Appendix F on page 301 for some common services and port numbers.
Protocol	This is the protocol (TCP, UDP or user-defined) used for the service.
Apply	Click Apply to save your customized settings.
Cancel	Click Cancel to exit this screen without saving.

	199
NBG4615 User’s Guide