ZyXEL Communications wireless n gigabit netusb router Mode, Apply, Cancel, Router, WISP Mode, Universal Repeater, Table 90 Maintenance > Sys OP Mode (continued)

Chapter 29 Maintenance

Table 90 Maintenance > Sys OP Mode (continued)

LABEL	DESCRIPTION
Access Point	Select Access Point Mode if your device bridges traffic between clients
	on the same network.
	• In Access Point Mode, all Ethernet ports have the same IP address.
	• All ports on the rear panel of the device are LAN ports, including the
	port labeled WAN. There is no WAN port.
	• The DHCP server on your device is disabled.
	• The IP address of the device on the local network is set to
	192.168.1.2.
Universal Repeater Mode	Select Universal Repeater Mode if you want to have wireless clients
	associate with the NBG4615 and also want to connect the NBG4615 to an
	existing access point.
	• In addition to wireless LAN settings between the NBG4615 and
	wireless clients, you also need to configure security and wireless
	settings between the NBG4615 and another access point.
	• WDS is not available when the NBG4615 is in Universal Repeater
	Mode.
	• The IP address of the device on the local network is the same as the IP
	address given to the NBG4615 while in Access Point Mode (default is
	192.168.1.2).
WISP Mode	Select WISP Mode if your device needs a wireless client to connect to an
	existing access point.
	• You cannot configure Wireless LAN settings (including WPS) and
	scheduling in the WISP Mode.
	• The IP address of the device on the local network is the same as the IP
	address given to the NBG4615 while in router mode (default is
	192.168.1.1).
Apply	Click Apply to save your settings.
Cancel	Click Cancel to return your settings to the default (Router).

Note: If you select the incorrect System Operation Mode you may not be able to connect to the Internet.

222
	NBG4615 User’s Guide