ZyXEL Communications wireless n gigabit netusb router No, Name, Metric, Active, Metric, Delete, Cancel, Address, Netmask, Address, Gateway, Add Rule, IP Subnet, Interface, Route Name, Gateway IP, Destination

Chapter 22 Static Route

22.2 IP Static Route Screen

Click Network > Static Route to open the IP Static Route screen.Figure 117 Network > Static Route

The following table describes the labels in this screen.

Table 73 Network > Static Route

LABEL	DESCRIPTION
Static Routing Settings
Route Name	Enter a the name that describes or identifies this route.
Destination IP	Enter the IP network address of the final destination.
Address
IP Subnet	This is the subnet to which the route’s final destination belongs.
Netmask
Gateway IP	Enter the IP address of the gateway.
Address
Metric	Assign a number to identify the route.
Interface	Select the interface through which the traffic is routed.
Add Rule	Click this to add the IP static route.
Application Rules Summary
No.	This is the number of an individual static route.
Active	The rules are always on and this is indicated by the icon.
Name	This is the name that describes or identifies this route.
Destination	This parameter specifies the IP network address of the final destination. Routing is
	always based on network number.
Gateway	This is the IP address of the gateway. The gateway is a router or switch on the
	same network segment as the device's LAN or WAN port. The gateway helps
	forward packets to their destinations.
Metric	This is the number assigned to the route.
Delete	Click the Delete icon to remove a static route from the NBG4615. A window
	displays asking you to confirm that you want to delete the route.
Cancel	Click Cancel to begin configuring this screen afresh.

182
	NBG4615 User’s Guide