ZyXEL Communications wireless n gigabit netusb router Apply, Apply, screen, Cancel, Cancel, Address, Address, NAT Setup, Server IP, Translation, NAT > General, Enable Network, remote management

Chapter 20 NAT

The following table describes the labels in this screen.

Table 69 Network > NAT > General

LABEL	DESCRIPTION
NAT Setup
Enable Network	Network Address Translation (NAT) allows the translation of an Internet protocol
Address	address used within one network (for example a private IP address used in a
Translation	local network) to a different IP address known within another network (for
	example a public IP address used on the Internet).
	Select the check box to enable NAT.
Default Server Setup
Server IP	In addition to the servers for specified services, NAT supports a default server. A
Address	default server receives packets from ports that are not specified in the
	Application screen.
	If you do not assign a Default Server IP address, the NBG4615 discards all
	packets received for ports that are not specified in the Application screen or
	remote management.
Apply	Click Apply to save your changes back to the NBG4615.
Cancel	Click Cancel to begin configuring this screen afresh.

20.3 Application

Port forwarding allows you to define the local servers to which the incoming services will be forwarded. To change your NBG4615’s port forwarding settings, click Network > NAT > Application. The screen appears as shown.

Note: If you do not assign a Default Server IP address in the NAT > General screen, the NBG4615 discards all packets received for ports that are not specified in this screen or remote management.

Refer to Appendix F on page 301 for port numbers commonly used for particular services.

Figure 111 Network > NAT > Application

174
	NBG4615 User’s Guide