Husqvarna 16 manual Safety instructions, General use

Page 7

SAFETY INSTRUCTIONS

Safety instructions

These instructions are for your safety. Read them carefully.

WARNING!

The inserted symbol means that important safety instructions need to be observed. It applies to your safety.

General use

•Read all the instructions in this operator’s manual and on the machine before you start it. Ensure you understand them and then observe them.

•Learn how to use the machine and its controls safely and learn to how to stop quickly. Also learn to recognize the safety decals.

•Only allow the machine to be used by adults who are familiar with its use.

•Make sure nobody else is in the vicinity of the machine when you start the engine, engage the drive or drive off.

•Make sure animals and people maintain a safe distance from the machine.

•Stop the machine if any one enters the working area.

•Clear the area of objects such as stones, toys, wires, etc. that may become caught in the blades and be thrown out.

•Look out for the ejector and do not direct it towards anyone.

•Stop the engine and prevent the engine from being started until you have cleaned the outlet channel.

8010-047

Read the operator’s manual before starting the machine.

6003-002

•Remember the operator is responsible for danger or accidents.

•Never carry passengers. The machine is only intended to be used by one person.

•Always look downwards and backwards before and while reversing. Keep watch for both large and small obstacles.

•Slow before cornering.

•Switch off the blades when you are not mowing.

Clear the area of objects before mowing.

8010-052

Never carry passengers.

WARNING!

This machine can sever hands and feet as well as throw objects. Failure to observe the safety instructions can result in serious injuries.

English – 5

Image 7

Contents Rider Svenska Contents Towing InstructionDear customer Travel and transport on public roadsEngine Transmission Safety InstructionsGood service Serial numberExplanation of Symbols General use Safety instructionsKeep children away from the area to be mowed Proceed as follows Driving on slopesChildren MaintenanceDo not smoke when carrying out maintenance Transport Presentation PresentationLocation of the controls Speed limiter Throttle and Choke leverParking brake Lift lever for cutting unit Cutting unitSeat Lever for adjustment of cutting heightFuelling Starting the engine DrivingCold engine Warm engine Driving the machine Cutting tips Release lever Stopping the engineHours MaintenanceMaintenance schedule Daily Maintenance intervalRight-hand fender Dismantling of the machine hoodsEngine hood Front hoodAdjusting the brake Checking and adjustment of the steering wiresPoorly adjusted brakes can result in reduced braking power Replacement of the fuel filter Checking and adjustment of the throttle wireReplacing the air filter Do not use compressed air to clean the paper filterIgnition system Check the level of the battery acidProcedures on contact with acid Checking of the fuel pump’s air filterInspecting the safety system Check the engine’s cooling air intake Checking the tyre pressureFitting the cutting unit Installing BioClipObserve caution to avoid trapping your hand Checking the cutting unit’s parallelism Removing the cutting unit Adjusting the parallelism of the cutting unitBelt change on BioClip Replacing the cutting unit belts6016-111 Placing in service position Service position for cutting unit6017-221 6017-222 8009-122 6017-223 Restoring from service position Checking the blades Removal of BioClip plug Combi Replacing the break-pin BioClipCheck the engine’s oil level LubricationChanging the oil Check the transmission’s oil level Lubricating the belt adjusterGeneral lubrication Problem Procedure Trouble Shooting ScheduleStorage ServiceWinter storage Technical Data EU declaration of conformity Only applies to Europe EU-DECLARATION of ConformityWork done Date, mileage, stamp, sign Servicejournal RiderPre-delivery service After first 5 hoursServicejournal Servicejournal Servicejournal ´+H$¶6k¨ Page 114 00