Remington Power Tools Electric Chain Saw owner manual Storage, Technical Service, Repair Service

Page 19

STORAGE

If storing saw for more than 30 days, follow steps below.

1.Drain oil tank after each use.

2.Remove and clean guide bar and chain. Clean guide bar and chain by soaking in petroleum based solvent or mild soap and water mixture.

3.Dry guide bar and chain.

4.Place chain in container filled with oil. This will prevent rust.

5.Wipe a thin coating of oil over surface of guide bar.

6.Wipe off outside of saw body. Do this with soft cloth dampened with a mild soap and water mixture.

7.Store chain saw

in a high or locked place, out of children’s reach

in a dry place

in a carrying case or with scabbard over guide bar

TECHNICAL SERVICE

You may have further questions about assembling, operating, or maintaining this product. If so, you can visit our Technical Service web site at www. desatech.com or contact our Technical Service Department at 1-800-858-8501 (English Only). You may also write to:

DESA Specialty Products™

ATTN: Technical Service Specialty Products P.O. Box 90004

Bowling Green, KY 42102-9004

When contacting DESA Specialty Products™, have ready

Your Name

Your Address

Your Phone Number

Model Number of Product

Date of Purchase (Include copy of receipt for writ- ten requests).

REPLACEMENT PARTS AND ACCESSORIES

WARNING:Useonlyreplacementparts andaccessoriesdescribedinthismanual. Use of other parts or accessories could damage saw or injure operator.

For original replacement parts and accessories, con- tact your nearest Authorized Dealer or Authorized Service Center for this product. If they can not sup- ply the part or accessory, contact your nearest Parts Central listed on page 65. Each Authorized Dealer, Authorized Service Center, and Parts Central is independently owned and operated.

See pages 62 through 64 for an Illustrated Parts List. If you need additional referral information, contact our Technical Service Department (see Technical Service). In Canada call 1-800-561-3372 for parts information.

REPAIR SERVICE

Note: Only use original replacement parts. This will protect your warranty coverage for parts replaced under warranty.

Each Authorized Service Center is independently owned and operated.

WARRANTY SERVICE

If product requires warranty service, return it to nearest Authorized Service Center. You must show proof of purchase. If faulty materials or workmanship caused damage, we will repair or replace product without charge. Note: Normal wear, misuse, abuse, neglect, or accidental damage is not covered under warranty.

NON-WARRANTY SERVICE

If product requires service, return it to nearest Autho- rized Service Center. Repairs will be billed to you at regular repair list prices.

For additional Service Center or warranty informa- tion, call 1-800-858-8501 or visit our Technical Service web site at www.desatech.com.

ENGLISH

113005

17

www.desatech.com

Image 19
Contents See pages 8 and 9 for additional information StepPage Electric Chain SAW Contents Read ALL Instructions Important Safety InformationBefore Operating SAW While Operating SAWKickback Kickback Safety Devices On This SawA dry place Maintenance and Storage of Chain SAWProduct Identification UnpackingChain SAW Names and Terms Indicator on side cover of saw AssemblyTop of guide bar face guide bar nose see Figure Bar, allow chain to cool then SAW Chain Tension AdjustmentLoosen nut Oiling Chain Operating Chain SAWTurn chain tensioning screw Clockwise to tension saw chain Filling OIL TankExtension Cords Clearing Sprocket Cover of DebrisPractice until you can maintain a steady, even cutting rate Cutting with the Chain SAWFelling a Tree Cutting Down a Tree Before Felling a TreeCut towards notch Felling Procedure Felling NotchFelling Cut Limbing a TreeLog Supported On Both Ends Bucking a LOGEntire Length Of Log On Ground Log Supported On One EndCutting a Limb Care of Guide BAR Cleaning MaintenanceCleaning SAW Body Normal Guide Bar MaintenanceReplacing SAW Chain Items Needed to Sharpen ChainSharpening Cutters Filing Cutter Depth GaugesStorage Technical ServiceReplacement Parts and Accessories Repair ServiceObserved Fault Possible Cause Remedy TroubleshootingModel Date Purchased Electric Chain SAW Limited WarrantySierra Eléctrica Limpieza Y Mantenimiento Información Importante DE SeguridadLEA Todas LAS Instrucciones Información Importante DE SeguridadAntes DE Utilizar LA Sierra AL Utilizar LA SierraLleve la sierra eléctrica de un lugar a otro ContragolpesCon el dedo fuera del gatillo Mantenimiento Y Almacenamiento DE SU Sierra Eléctrica Identificación DEL Producto DesembalajeRetire todos los elementos del embalaje Rueda dentada Rueda dentada que impulsa la cadena TerminologíaFigura 5 Bloqueo del retenedor de la barra guía EnsamblajeImportante Ajuste DE Tensión DE LA Cadena SerradaDe 0C, utilice aceite lubricante SAE #10. Si la USO DE LA Sierra EléctricaLubricación Lubricación DE LA Cadena Sistema de lubricación manual30 m Remoción DE Restos DE LA Tapa DE LA Rueda DentadaCables DE Prolongación 15 mAdvertencia Realización DE CortesTala DE UN Árbol Derribamiento de un árbol Antes de derribar un árbolProcedimiento de tala Corte de la muesca Tala finalCorte en dirección a la muesca Siga estas instrucciones para trozar un tronco Desmembramiento DE UN ÁrbolTrozado DE UN Tronco La totalidad del tronco sobre el sueloTronco apoyado sobre ambos extremos Tronco apoyado en un extremoPoda DE UN Árbol Limpieza DEL Cabezal Limpieza Y MantenimientoCuidado DE LA Barra DE Guía Afilado de los elementos de corte Mantenimiento normal de la barra de guíaAfilado DE LA Cadena Elementos necesarios para afilar la cadenaRecambio DE LA Cadena Serrada Limado de los calibradores de medida de profundidadDentada adecuada a su modelo, consulte la sección Servicio DE Reparación AlmacenamientoServicio Técnico Accesorios Y Piezas DE RepuestoFalla Observada Causa Posible Solución Diagnóstico Y Resolución DE ProblemasModelo Fecha de compra Garantía Limitada DE Sierra EléctricaTronçonneuse Électrique Prime Nettoyage ET Entretien Consignes DE Sécurité ImportantesPendant Lutilisation DE LA Tronçonneuse Agréé voir Service Técnique, Lorsquon est presséConsignes DE Sécurité Importantes Avant D’UTILISER LA TronçonneuseRecul SuiteEntretien ET Remisage DE LA Tronçonneuse Entretien de la tronçonneuse et protection contre le reculLisation sécuritaire et correcte de la tronçonneuse DéballageIdentification DU Produit Vocabulaire DE LA TronçonneuseVoyant sur le capot latéral de la tronçonneuse MontageLe tronçonnage et l’abattage Boulon et sur le dispositif de retenue du guideÉtape Au besoin, resserrer à la main l’écrou du guide- chaîneRéglage DE LA Tension DE LA Chaîne Nettoyage DES Débris DU Couvercle DU Pignon Utilisation DE LA TronçonneuseRemplissage DU Réservoir D’HUILE Lubrification DE LA Chaîne Système de lubrification manuelLe crochet de maintien de la rallonge jusquà ce quil Rallonges ÉlectriquesCordon dalimentation de la tronçonneuse Avertissement Sciage Avec LA TronçonneuseAbattage D’UN Arbre Avant d’abattre un arbre’entaille inférieure Scier en direction du sifflet Procédure d’abattage Sifflet d’abattageTrait d’abattage Enlever le morceau de tronc créé par les deux entaillesTronçonnage D’UNE Bille ÉbranchageTaille D’UN Arbre Élagage Toute la bille repose au solLa bille est soutenue aux deux extrémités La bille est soutenue à une extrémitéNettoyage DU Carter DE Tronçonneuse Nettoyage ET EntretienOutils nécessaires pour affûter la chaîne Entretien DE LA GUIDE-CHAÎNEEntretien normal de la guide-chaîne Affûtage DE LA ChaîneUtiliser le guide lime pour un limage à 30˚ Remplacement DE LA ChaîneAffûtage des taillants Limage des limiteurs de profondeur des taillantsRemisage Service TechniquePièces DE Rechange ET Accessoires Service DE RéparationDéfaillance Observée Cause Possible Remède DépannageGarantie Limitée Pour LA Tronçonneuse Électrique Information SUR LA Garantie113005 Renvoi Pièce DESCRIPTION/DESCRIPCIÓN/DESCRIPTION Parts LIST/LISTA DE REPUESTOS/LISTE DES PiècesContinúa/À suivre Parts CENTRAL/CENTRAL DE PIEZAS/DÉPÔT DE Pièces 113005 113005 113005 Page Stop