RedMax BCZ2650T, BCZ2650SS manual Set up, SE1, Installing Handle, SE2 Installing Debris Guard

BCZ2650S/T/SS

6. Set up

IMPORTANT

Tighten the screws gradually by turns.

SE1

(1)

■INSTALLING HANDLE

•Mount the handle to the shaft tube and clamp it at a location that is comfortable to you. (SE1)

(1) About 19 inches (48cm)

U S

SE2

■INSTALLING DEBRIS GUARD

•Put the debris guard on the gear box, attach it with the screws and hardware provided. (SE2)

SE3

■INSTALLING LINE HEAD (SE3)

1. While locking the gear shaft, by inserting the supplied tool into the upper holder on the gear box, loosen and remove the hexagon nut(left- handed)

2. Fit the line head assembly to the gear shaft over the holders. Hand-tighten it securely.

IMPORTANT

•You need not holder (B) and nut when installing the line head.

•Do not attach any metal blade to BCZ2650T/BCZ2650SS.

US-9