RedMax BCZ2650SS manual HOW to MIX Fuel Recommended Mixing Ratio Gasoline 50 OIL, Fueling the Unit

Page 13

BCZ2650S/T/SS

7. Fuel

test standard has been discontinued by API in 1995 and it no longer exists.

IMPORTANT

Gasoline/Oil mixture Storage Recommendations

Store your gasoline or gasoline/oil mixture in a cool dry area in a tightly sealed approved container to limit the entry of moisture and additional air (oxygen). Moisture and air cause the development of varnish and gum, making the fuel stale. Stored gasoline and gasoline/oil mixture ages and loses its octane rating and volatility. Do not mix more gasoline/oil than you intend to use in 30 days, and 60 days when fuel stabilizer is added. RedMax Air-Cooled "Max Life" Synthetic blend Premium two-stroke engine oil "Contains fuel stabilizer" and will automatically extend your gasoline/oil mixture life up to 60 days.

HOW TO MIX FUEL

RECOMMENDED MIXING RATIO GASOLINE 50 : OIL 1

(when using RedMax Air-Cooled "Max Life")

50:1 MIXING CHART

GASOLINE

gal.

1

2

3

4

5

 

 

 

 

 

 

 

2-CYCLE OIL

fl.oz

2.6

5.2

7.8

10.4

13

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GASOLINE

liter

1

2

3

4

5

 

 

 

 

 

 

 

2-CYCLE OIL

ml

20

40

60

80

100

 

 

 

 

 

 

 

WARNING

1.Select flat and bare ground for fueling.

2.Move at least 10 feet (3 meters) away from the fueling point before starting the engine.

3.Stop the engine before refueling the unit. At that time, be sure to sufficiently agitate the mixed gasoline in the container.

FOR YOUR ENGINE LIFE, AVOID

1.FUEL WITH NO OIL (RAW GASOLINE) – It will cause severe damage to the internal engine parts very quickly.

2.GASOHOL – It can cause deterioration of rubber and/or plastic parts and disruption of engine lubrication.

3.OIL FOR 4-CYCLE ENGINE USE – It can cause spark plug fouling, exhaust port blocking, or piston ring seizure.

4.Mixed fuels which have been left unused for a period of one month or more may clog the carburetor and result in the engine failing to operate properly.

5.In the case of storing the product for a long period of time, clean the fuel tank after rendering it empty. Next, Start the engine and run the carburetor dry residual fuel.

6.In the case of scrapping the used mixed oil container, scrap it only at an authorized depository site.

NOTE

As for details of quality assurance, read the description in the section Limited Warranty carefully. Moreover, normal wear and change in product with no functional influence are not covered by the warranty. Also, be careful that, if the usage in the instruction manual is not observed as to the mixed gasoline, type of oil or fuel to be used. described therein, it may not be covered by the warranty.

U S

WARNING

• Pay attention to agitation.

1.Measure out the quantities of gasoline and oil to be mixed.

2.Put some of the gasoline into a clean, approved fuel container.

3.Pour in all of the oil and agitate well for 10seconds.

4.Pour in the rest of gasoline and agitate again for at least one minute. As some oils may be difficult to agitate depending on oil ingredients, sufficient agitation is necessary. Be careful that, if the agitation is insufficient, there is an increased danger of early piston seizure due to abnormally lean mixture.

5.Place a clear indication on the outside of the container to avoid mixing up with gasoline or other containers that dont contain oil.

6.Indicate the contents on outside of container for easy identification.

FUELING THE UNIT

1.Untwist and remove the fuel cap. Rest the cap on a clean surface.

2.Put fuel into the fuel tank to 80% of the full capacity.

3.Fasten the fuel cap securely and wipe up any fuel spillage around the unit.

US-11

Image 13
Contents BCZ2650S BCZ2650T / BCZ2650SS Page OWNERS/OPERATORS S Manual Contents Parts location SpecificationsEmission Control Symbols on the machineManufactured For safe operation Before use Using the productStarting the engine Avoid noise problem Fuel safetyMaintenance TransportDisposal Installing Handle Set upSE2 Installing Debris Guard SE3 Installing Line Head SE3Fuel WarrantyFuel Gasoline RequirementsFor Your Engine LIFE, Avoid HOW to MIX Fuel Recommended Mixing Ratio Gasoline 50 OILFueling the Unit Operation Cutting Work Line Head Usage Adjusting the Line LengthTrimming Grass and Weeds OP7Maintenance Chart MaintenanceFor safety reasons, do not use metalreinforced line MA1 Refilling Trimming Line MA1Muffler MA2 Replacement Plug is a NGK CMR7HAIR Filter MA3Storage MA8 Procedures to be Performed After Every 100 Hours of USEDisposal MA7Optional blade usage for BCZ2650S only Starting the Engine OPT6 OPT7 OPT8Cutting Method OperationHow you can maintain the best control Maintenance BladeOPT10 22, 24-tooth blade Tooth blade Point OPT10Case 1. Starting failure Troubleshooting guideCheck Probable Causes Action Mode D’EMPLOI Tables des matieres Differents Types D’AVERTISSEMENT DE CE Mode D’EMPLOIBCZ2650S/BCZ2650T/BCZ2650SS Dimensions totales L x L x H Emplacement des piecesFiche technique Etiquettes d’avertissement sur la machine Symboles utilises sur la machineMesures DE Lutte Contre LES Emissions Consignes de securite Demarrage DU Moteur Avant DE Faire Demarrer LE MoteurUtilisation DU Produit Sécurité carburant TransportRangement Comment eviter les nuisances sonoresMise au rebut Les doigts morts il est fortement recommandé deEntretien Assemblage SE3 Installation DE LA Tete DE FIL SE3Mise EN Place DE LA Poignee SE2Carburant CarburantTypes DE Carburants Requis Remplissage DU Reservoir ’ANNULATION DE LA Garantie DU Moteur a DeuxEviter Pour Prolonger LA Duree DE VIE DU Moteur FR-12 Fonctionnement Coupe DE Gazon OU D’HERBES OP7 Travail DE Coupe Utilisation DE LA Tete DE FILReglage DE LA Longeur DU FIL DE Coupe Entretien MA1 Remplacement DU FIL DE Coupe MA1Tableau D’ENTRETIEN MA2 Filtre a AIR SilencieuxFiltre a Carburant PARE-ETINCELLESMise au rebut RangementCylindre Ouïe d’entrée d’air de refroidissement arrière OPT3 OPT1 OPT2 Choisir LA LameMise EN Place DE LA Lame OPT5 Equilibrage DE LA MachineFonctionnement Methode DE CoupeControle DES Coups DE Recul Entretien Lame Comment conserver le meilleur contrôle de la machineVerification Causes Probables Action Guide de localisation des pannesPage Desbrozador Advertencias Contenidas EN EL Manual ContenidoEspecificaciohes Situación de las piezasBCZ2650S/BCZ2650T/BCZ2650SS Símbolos presentes en la máquina Etiqueta de advertencia en la máquinaPosición Control DE EmisionesInstrucciones de seguridad Arranque DEL Motor Antes DE Arrancar LA MáquinaUSO DEL Producto Cómo evitar problemas de ruidoTransporte Seguridad en el uso del combusibleEliminación Para la protección contra las vibracionesMantenimiento Montaje Combustible CombustibleRequerimientos de la Gasolina Preste atención en la agitación Anulará Lagarantía DEL Motor DE DOS Tiempos RedMaxAbastecimiento DE LA Unidad Para Contribuir a LA Vida Útil DEL MOTOR, EviteVacíe del carburador el combustible compuesto Cómo Parar EL Motor OP3 UsoAjuste Cable DEL Acelerador Ajuste DE LA Velocidad DE Marcha EN Vacío OP6Desbroce DE Hierbas Y Maleza OP7 Trabajo DE Corte USO DEL Cabezal DE HiloAjuste DE LA Longitud DE LA Línea Tabla DE Mantenimiento MantenimientoMA1 Rellenado DE LA Línea DE Desbroce MA1 Silenciador Filtro DE Aire MA2MA3 Filtro DE Combustible ParachispasEliminación AlmacenamientoMA8 Procedimientos a Realizar Cada 100 Horas DE USO Cilindro Toma de aire de refrigeración posteriorElija LA Hoja Uso de hoja opcional sólo para BCZ2650SPAR Torsor Monte LA HojaUSO Método DE CorteControl DEL Contragolpe DE LA Hoja Qué causa el contragolpeCuál es la mejor forma de mantener Cómo se puede reducir la posibilidad de contragolpe?Mantenimiento Hoja Punto OPT10Comprobar Posibles Causas Acción 13. Guía de localización y solución de problemasPage Remarque Parts listNota Drive Unit BCZ2650S S/N 90200101 and up Part Number Description Qty Optional Blade & AccessoriesKey# Part Number Description Qty Drive Unit BCZ2650T/SS S/N 90200101 and up Key# Part Number Description Optional AccessoriesEngine Unit BCZ2650S/T/SS S/N 90200101 and up Cylinder Page Page Zenoah AMERICA, INC