Makita DCS 9000 manual Fuels / Refuelling, Fuel mixture, Correct mixture ratio

Page 7

Fuels / Refuelling

0

 

EN+I

50:l

40:l

Fuel

I

1000 cm3

(1 litre)

20 cm3

25 cm3

5000 cm3

(5 litres)

100 cm3

125 cm3

 

 

 

250 cm3

Fuel mixture

The engine of the chain saw is a high-efficiency two-stroke engine. It runs on a mixture of gasoline and two-stroke engine oil.

The engine is designed for unleaded regular gasolinewith a min. octane value of 91 ROZ. In case no such fuel is available, you can use fuel with a higher octane value. This will not affect the engine.

In order to obtain an optimum engine output and to protect your health and the environment use unleaded fuel only.

For lubricating the engine use a two-stroke engine oil (quality grade: TC-3), which is added to the fuel. The engine has been designed for use of MAKITA high-performance two-stroke en- gine oil and a mixture ratio of only 50:l to protect the environ- ment. In addition, a long service life and reliable operation with a minimum emission of exhaust gases are ensured.

MAKITA high-performance two-stroke engine oil is available in the following sizes to suit your individual requirements:

1 I ordernumber 980008607

100 ml order number 980008 606

In case MAKITA high-performance two-stroke engine oil is not available, it is urgently recommended to use a mixture ratio of 40:1, as otherwise optimum operation of the engine cannot be guaranteed.

The correct mixture ratio:

50:l when using MAKITA high-performancetwo-stroke engi- ne oil, i. e. mix 50 parts gasoline with 1 part oil.

40:l when using other two-stroke engine oils, i. e. mix40 parts gasoline with 1 part oil.

A

BIO

TOP

Chain oil

Use an oil with adhesive additive for lubricating the chain and guide bar. The adhesive additive prevents the oil from being flung off the chain too quickly.

We recommend the use of chain oil which is bio-degradable in order to protect the environment. The use of bio-degradable oil may even be required by local regulations.

The chain oil BIOTOP sold by MAKITA is made of special vegetable oils and is 100%bio-degradable. BIOTOP has been granted the "blue angel" (Blauer Umweltschutz-Engel)for being particularly environment-friendly (RAL UZ 48).

BIOTOP chain oil is available in the following sizes:

1 I order number 980008610

5 I order number 980008 611

20 I order number 980008 613

Bio-degradable oil is stable only for a limited period of time. It should be used within 2 years from the date of manufacture (printed on the container).

Important note on bio-degradable chain oils:

If you are not planning to use the saw again for an extended period of time (longer than the expiration date of the chain oil), empty the oil tank and put in a small amount of regular engine oil (SAE 30),and then run the saw for a time. This is necessary to flush out all remaining bio-degradableoil from the oil tank, oil- feed system, chain and guide bar, as many such oils tend to leave sticky residuesover time, which can cause damage to the oil pump or other parts.

The next time you use the saw, fill the tank with BIOTOP chain oil again.

NOTE:

For preparing the fuel-oil mixture first mix the entire oil quantity with half of the fuel required, then add the remaining fuel. Thoroughly shake the mixture before filling it into the chain saw tank.

It is not wise to add more engine oil than specifiedto ensure safe operation.This will only result in a higher production of combus- tion residues which will pollute the environment and clog the exhaust channel in the cylinder as well as the muffler. In addition, fuel consumption will rise and performance will de- crease.

NEVER USE WASTE OIL

Waste oil is very dangerous for the environment.

Waste oil contains high amounts of carcinogenic substances.

Residues in waste oil result in a high degree of wear and tear at the oil pump and the sawing device.

In case of damage caused by using waste oil or unappropriate chain oil the product guarantee will be null and void.

Your salesman will inform you about the use of chain oil.

12

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Pagina 71-73,78 Thank you for purchasing a Makita product Table of contentsPacking Delivery SymbolsGeneral precautions Safety PrecautionsDCS Denaimination of componentsChain brake Correct mixture ratio Fuels / RefuellingFuel Fuel mixtureAvoid Skin and EYE Contact Follow the Safety PrecautionsAdjusting the chain lubrication Motor must be switched offChecking the chain lubrication Switching off the engine @Startingthe engine Checking the chain brakeDCS Lnhaltsverzeichnis Herzlichen Dank fur Ihr VertrauenVerpackung Lieferumfang SymboleHinweis SICHERHElTSHlNWElSE11300 200 ZundanlageZundkerze Elektrodenabstand Oder ZundkerzeKettenbremse auslosen blockieren KettenbremseHerstellung des richtigen Mischungsverhaltnisses Betriebsstoffe / Tanken @ @Niemals Altol Verwenden Kraftstoff50l 40lKettenschmierungeinstellen HAUT- UND Augenkontakt VermeidenTanken UNBEDINGTSlCHERHElTSHlNWElSEBEACHTENKettenschmierung prufen Motor startenKettenbremse prufen Motor ausschaltenAuszug aus der Ersatzteilliste Declarationde conformite pour la CEE Nous vous remercions de votre confianceSommaire Etendu Symboles’hesitez pas a consulter votre revendeur Dolmar RemarqueDesignation des pieces Caracteristiques techniquesContinuer a relever la pointe du rail-guide de la chaine et Frein de chaTneQue la chaine s’applique sur la face inferieure du rail ContrBle de la tension de la chaine’UTILISEZ Jamais DE Huiles Usagees Melange carburantHuile de chaine de sciage RemarqueRespecter Imperativementles Regles DE Securite Evitez LE Contact Avec LA Peau ET LES YeuxReglage du graissage de la chaine Verifier le graissage de la chaine Demarrer le moteurVerifier le frein de chaTne ArrQterle moteurExtrait de la liste des pieces de rechange Aplicacion en invierno Muchas gracias para su confianzaLndice EnvaseHerramienta de montaje Extension del suministroSimbolos Motosierra Makita DCS Guia Cadena Protector del rielNota Recomendaciones DE SeguridadRecomendaciones generales Caracteristicas de una sierra accionada por motorDenominacion de 10s componentes 3\ Datos tecnicosSoltar el freno de cadena Freno de cadenaEn la fraccion de un segundo la cadena para Poner en funcion el freno de cadena bloquearMezcla de combustible Cargar combustibleLceite para cadenas Is610 si el motor esta desconectado! @ Ajustar el engrase de cadenaTomar combustible Lubrificar la cadena de sierraControlar el engrase de cadena Arrancar el motorControlar el freno de cadena Parar el motorEtracto de la lista de piezas de repuesto Type Serienummers Werkplaatsservice,reserve-onderdelenenInhoudsopgave VerpakkingOmvar SymbolenOpmerking VeiligheidsvoorschriftenTankdop brandstoftank Technische specificatiesBenaming van de onderdelen GashendelKettingrem inschakelen blokkeren KettingremControle van de kettingspanning 0STOP Een fractie van een seconde wordt de zaagketting stilgezetBrandstofmengsel Gebruik Nooit Afgewerkte OLlEBradstof LiterKettingsmering afstellen HUID- EN OogcontactvermijdenWarme start Kettingrem controlerenMotor uitzetten Ketti ngsmering controlerenVerantwoordelijk Uittreksel uit de reserve-onderdelenlijstMolte grazie per la fiducia nei nostri confronti Simboli Parti integranti della fornituraCenni generali Cenni Sulla SicurezzaIndicate i dati quando ordinate pezzi di ricambio Denominazione dei singoti pezzi DCS291 430 50l G n yTarghetta DCS 9000Allentamento del freno della catena Controllo della tensione della catenaLa catena della sega si arresta in una frazione di secondo Azionamento del freno della catena bloccaggioMiscela RifornimentoMateriali d’esercizio CarburanteDisinserite prima sempre il motore Rifornimento di carburanteRegolazione della lubrificazione di catena Lubrificazione della catena della segaControllate la lubrificazione della catena Avviamento del motoreControllate la freno della catena Spegnimento del motoreEstratto dalla lista dei pezzi di ricambio

DCS 9000 specifications

The Makita DCS 9000 is a powerful and versatile chainsaw designed for demanding applications in professional forestry, construction, and landscaping. Known for its reliability and performance, the DCS 9000 is primarily aimed at professionals who require a robust tool to tackle heavy-duty cutting tasks.

One of the standout features of the Makita DCS 9000 is its high-performance engine. Equipped with a 90cc, 2-stroke engine, this chainsaw delivers an impressive power-to-weight ratio, enabling it to handle large-diameter logs and thick branches with ease. The advanced engine technology also contributes to improved fuel efficiency and reduced emissions, aligning with the increasing environmental standards in the industry.

The DCS 9000 incorporates a sophisticated air filtration system that helps to extend the life of the engine by keeping dust and debris at bay. This system ensures that the chainsaw operates efficiently, even in challenging environments, providing a longer service life for the tool. Furthermore, the quick-access air filter cover allows users to easily maintain the filter, keeping the chainsaw in optimal working condition.

In terms of safety features, the DCS 9000 is equipped with a chain brake that prevents accidental activation and protects the user from injury. The tool's anti-vibration technology effectively reduces hand fatigue during prolonged usage, enhancing comfort and control. Additionally, the chainsaw features a built-in inertia brake that stops the chain swiftly when necessary, ensuring safer operation.

The ergonomic design of the DCS 9000 includes a lightweight construction that balances power and ease of use, enabling operators to maneuver the tool with precision. The soft-grip handles provide added comfort, allowing for extended periods of operation without discomfort.

Another notable characteristic of the DCS 9000 is its heavy-duty bar and chain, which are engineered for longevity and optimal cutting performance. The tool can accommodate various bar lengths, making it adaptable for different cutting tasks.

Overall, the Makita DCS 9000 stands out as a premium chainsaw made for professionals. Its combination of power, safety features, and ergonomic design ensures that users can tackle tough jobs with confidence and efficiency. Whether felling trees, pruning branches, or cutting firewood, the DCS 9000 is a reliable companion for any cutting task.
Top Page Image Contents