Makita DCS 330 TH Troubleshooting, Spare parts, Guarantee, Malfunction System Observation Cause

Page 33

Spare parts

Reliable long-term operation, as well as the safety of your chain saw, depend among other things on the quality of the spare parts used. Use only original MAKITA parts, marked

Only original spare parts and accessories guarantee the highest quality in material, dimensions, function and safety.

Original spare parts and accessories can be obtained from your local dealer. He will also have the spare part lists to determine the required spare part numbers, and will be constantly informed about the latest improvements and spare part innovations.

Please bear in mind that if parts other than original MAKITA spare parts are used, this will automatically invalidate the MAKITA product guarantee.

Guarantee

MAKITA guarantees the highest quality and will therefore reimburse all costs for repair by replacement of damaged parts resulting from material or production faults occurring within the guarantee period after purchase. Please note that in some countries particular guarantee conditions may exist. If you have any questions, please contact your salesman, who is responsible for the guarantee of the product.

Please note that we cannot accept any responsibility for damage caused by:

•Disregard of the instruction manual.

•Non-performance of the required maintenance and cleaning.

•Incorrect carburetor adjustment.

•Normal wear and tear.

•Obvious overloading due to permanent exceeding of the upper performance limits.

•Use of guide bars and chains which have not been approved.

•Use of guide bar and chain lengths which have not been approved.

•Use of force, improper use, misuse or accidents.

•Damage from overheating due to dirt on the fan housing.

•Work on the chain saw by unskilled persons or inappropriate repairs.

•Use of unsuitable spare parts or parts which are not original MAKITA parts, insofar as they have caused the damage.

•Use of unsuitable or old oil.

•Damage related to conditions arising from lease or rent contracts.

Cleaning, servicing and adjustment work is not covered by the guarantee. All repairs covered by the guarantee must be performed by a MAKITA service centre.

Troubleshooting

Malfunction

System

Observation

Cause

 

 

 

 

Chain does not run

Chain brake

Engine runs

Chain brake actuated.

 

 

 

 

Engine does not start or

Ignition system

Ignition spark

Malfunction in fuel supply system, com-

only with difficulty

 

 

pression system, mechanical malfunction.

 

 

No ignition spark

Switch on STOP, fault or short-circuit in the

 

 

 

wiring, plug cap or spark plug defective.

 

Fuel supply

Fuel tank is filled

Choke in wrong position, carburetor defective,

 

 

 

suction head dirty, fuel line bent or interrupted.

 

Compression

Inside

Cylinder base packing ring defective, radial

 

system

 

shaft packings defective, cylinder or piston

 

 

 

rings defective

 

 

Outside

Spark plug does not seal.

 

Mechanical

Starter does not engage

Spring in starter broken, broken parts

 

malfunction

 

inside the engine.

 

 

 

 

Warm start difficulties

Carburetor

Fuel tank is filled

Wrong carburetor adjustment.

 

 

Ignition spark

 

 

 

 

 

Engine starts, but

Fuel supply

Fuel tank is filled

Wrong idling adjustment, suction head or

dies immediately

 

 

carburetor dirty. Tank venting defective, fuel

 

 

 

line interrupted, cable defective, STOP switch

 

 

 

defective.

 

 

 

 

Insufficient power

Several systems

Engine is idling

Air filter dirty, wrong carburetor adjustment,

 

may be involved

 

muffler clogged,exhaust channel in cylinder

 

simultaneously

 

clogged, spark arrester screen clogged.

 

 

 

 

No chain lubrication

Oil tank/pump

No oil on the chain

Oil tank empty.

 

 

 

Oil guide groove dirty.

 

 

 

Oil-pump adjusting screw incorrectly adjusted.

 

 

 

 

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Owner’s Safety Manual Makita DCS 330 TH ContentsSymbols Case one of the parts listed should not be includedEngine stop switch Delivery inventoryAdditional safety precautions Safety precautions for chain saw operatorsGeneral Safety Precautions OperatorPhysical Condition Saw Proper clothingUse of the saw Transporting the chain sawFeet Chain saw operating instructionsFueling Fueling instructionsImportant adjustments Working conditionsCutting instructions Reactive forces during the cut, including kickback KickbackTo avoid kickback Saw chain cutter sharpnessSpeed of contact at which the cutter contacts the object Depth gaugesPushback Cutting techniquesTo avoid pushback To avoid pull-in= cutting down area Felling instructionsSectioning Method Plunge-Cut MethodBucking LimbingMaintaining and storing the saw Maintenance and RepairDenomination of components Approved bar and chain combinations Technical data DCS 330 THMounting the guide bar and saw chain StopTightening the saw chain Checking the chain tension Chain brakeEngaging the chain brake braking Releasing the chain brakeChain oil FuelFuel mixture Correct mixture ratioWaste oil Clean screw cap and tank after refuellingRefuelling Important note on bio-degradable chain oilsChecking the chain lubrication Adjusting the chain lubricationCold start Starting the engineWarm start Stopping the engineChecking the chain brake Adjusting the carburetorImportant information Set idle speed stepSharpening the saw chain Stop 65 mm 025Min Files and how to work with them Cleaning the guide bar, lubricating the sprocket nose Cleaning the brake band and sprocket interiorCleaning the air filter Stop Replacing the saw chainReplacing the suction head Replacing the starter cable Replacing the spark plugElectrode gap Checking the ignition sparkCleaning the muffler / spark arrester screen Cleaning the cylinder spaceReplacing the return spring Instructions for daily and periodic maintenance Service, spare parts and guaranteeMaintenance and repair Guarantee TroubleshootingSpare parts Malfunction System Observation CauseDCS 330 TH Extract from the spare parts listFor your notes Ce produit est en conformité avec SommaireSymboles Etendue de la fournitureSi un des composants indiqués ici ne devait pas être Mesures de sé curité supplé mentaires Mesures gé né rales de sé curité ’utilisateurCondition physique La tronç onneuse Quels vê tements porter?Utilisation de la tronç onneuse Transport de la tronç onneuseRavitaillement en carburant Instructions de ravitaillementDé marrage Ré glages importants Conditions de travailInstructions de coupe Choc de recul Kickback Affû tage des plaquettes de coupe de la chaîne Pour é viter le choc de reculLes limiteurs de profondeurs Le recul Techniques de coupePour é viter le recul Pour é viter la traction= zone d’abattage Instructions d’abattageMé thode de coupe en plongé e Mé thode de sectionnementDé bitage EbranchageEntretien et stockage de la tronç onneuse Entretien et ré parationLevier de gaz Bouton de blocage pour mi-gaz Dé signation des piè cesCombinaisons autorisé es de guides et de chaînes Caracté ristiques techniques DCS 330 THMontage du rail-guide et de la chaîne de sciage Mise EN RouteRemarque Tendre la chaîne de sciageContrô le de la tension de la chaîne Frein de chaîneEnclencher le frein de chaîne bloquer Libé rer le frein à mainHuile de chaîne de sciage CarburantsMé lange carburant Ré alisation du rapport correct du mé langeHuile Usagé e Remplissage des ré servoirsRemarque importante pour les huiles de chaîne De sciage bio Vé rifier le graissage de la chaîne Ré glage du graissage de la chaîneEffectuer que si le moteur est arrê té ! Stop RemarqueDé marrage à froid Dé marrer le moteurDé marrage à chaud Arrê ter le moteurRé glage du carburateur Vé rifier le frein de chaîneInformation importante Ré glage du ralenti marche à vide point65 mm Affû tage de la chaîne De sciageLime et guidage de la lime Nettoyer le guide-chaîne Regraisser l’é toile de dé viation Nouvelle chaîne de sciage Remplacement de la cré pine d’aspirationNettoyage du filtre d’air Stop Ne pas nettoyer le filtre à air à l’essenceRemplacement du cordon de lancement Remplacement de bougieEcartement des é lectrodes Vé rification de l’é tincelle d’allumageNettoyer le silencieux / du pare-é tincelles Remplacement du ressort de rappelNettoyer l’inté rieur du cylindre Risque de blesssure! Un ressort cassé peut sauterService d’atelier, piè ces de rechange et garantie Indications de maintenance et d’entretien pé riodiquesMaintenance et ré parations Garantie Piè ces de rechangeRecherche de pannes Panne Systè me Observation OrigineExtrait de la liste des piè ces de rechange Notas USA Makita U.S.A., Inc Makita Canada Inc

DCS 330 TH specifications

The Makita DCS 330 TH is a powerful and versatile chainsaw designed for professional users who demand high performance and reliability in their tools. This model is particularly favored for its exceptional cutting capabilities, making it an ideal choice for both forestry applications and general landscaping tasks.

One of the standout features of the Makita DCS 330 TH is its robust 32.2 cc 2-stroke engine, which delivers impressive power for cutting through various types of wood. With an engine speed of up to 12,000 RPM, this chainsaw can tackle thick branches and logs with ease, allowing the user to complete their tasks efficiently. The combination of power and lightweight design ensures that users can handle the saw comfortably for extended periods without excessive fatigue.

The chainsaw is equipped with a 12-inch guide bar, which enables precise cutting while maintaining a manageable size for various applications. This length strikes an optimal balance between maneuverability and cutting depth, making the DCS 330 TH an excellent choice for both pruning and felling small to medium-sized trees.

The Makita DCS 330 TH also incorporates advanced technologies that enhance its performance and user experience. One of these technologies is the automatic oil pump, which ensures that the chain is adequately lubricated during operation. This feature not only prolongs the life of the chain and bar but also enhances cutting efficiency and safety.

User comfort is further prioritized through the inclusion of an anti-vibration system that minimizes the impact of vibration during operation. This system significantly reduces user fatigue and allows for more precise control, making it easier to perform detailed cutting tasks.

Safety features are also a prominent aspect of the Makita DCS 330 TH. The chainsaw is designed with a chain brake system that quickly halts the chain in case of kickback, providing an additional layer of protection for the operator. Additionally, the tool's throttle lock ensures that the saw remains stable during operation, preventing accidental starts.

In summary, the Makita DCS 330 TH is a highly capable chainsaw that combines power, comfort, and safety features into one reliable package. Its lightweight design, advanced technologies, and user-friendly characteristics make it an excellent choice for anyone looking to invest in a quality chainsaw for demanding applications.
Top Page Image Contents