WARNING: Remove battery pack before servicing, cleaning or removing material from the gardening appliance.
The cutting blades are made from high quality, hardened steel and | |
with normal usage, they will not require resharpening. However, if you | |
accidentally hit a wire fence (figure 9), stones, | 9 |
glass or other hard objects, you may put a nick in | |
the blade. There is no need to remove this nick as |
|
long as it does not interfere with the movement of |
|
the blade. If it does interfere, remove the battery |
|
and use a fine toothed file or sharpening stone to |
|
remove the nick. If you drop the trimmer, carefully |
|
inspect it for damage. If the blade is bent, housing |
|
cracked, handles broken or if you see any other |
|
condition that may affect the trimmer’s operation |
|
contact your local Black & Decker Service Center |
|
for repairs before putting it back into use. |
|
Fertilizers and other garden chemicals contain agents which greatly accelerate the corrosion of metals. Do not store the unit on or adjacent to fertilizers or chemicals.
With the battery removed, use only mild soap and a damp cloth to clean the unit. Never let any liquid get inside the unit; never immerse any part of the unit into a liquid. Prevent the blades from rusting by applying a film of light machine oil after cleaning.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This Class B digital apparatus complies with Canadian
10