Black & Decker LHT2436 Troubleshooting, Problem, Possible Cause, Possible Solution, Yellow Pages

		Troubleshooting
	Problem	Possible Cause	Possible Solution
• Slow running, noisy or hot blades.		• Dry, corroded blades.	• Lubricate blades.
		• Blades or blade support bent.	• Straighten blade or blade support.
		• Bent or damaged teeth.	• Straighten teeth.
		• Loose blade bolts.	• Tighten blade bolts.
• Unit will not start.		• Battery not installed properly.	• Check battery installation.
		• Battery not charged.	• Check battery charging requirements.
		• Lock off not fully operated.	• Check that lock off is fully pulled back
			prior to moving main trigger.
• Battery won’t charge.		• Battery not inserted into charger.	• Insert battery into charger until green LED appears.
		• Charger not plugged in.	Charge up to 8 hours if battery totally drained.
			• Plug charger into a working outlet. Refer to
			“Important Charging Notes” for more details.
			• Check current at receptacle by plugging in a
			lamp or other appliance.
			• Check to see if receptacle is connected to a
			light switch which turns power off when you turn
		• Surrounding air temperature too hot	out the lights.
			• Move charger and tool to a surrounding air
		or too cold.	temperature of above 40 degree F (4.5°C) or
			below 105 degree F (+40.5°C).

For assistance, visit our website www.blackanddecker.com for the location of the service center nearest you or call the BLACK &
DECKER help line at 1-800-544-6986.
Imported by	See ‘Tools-Electric’
Black & Decker (U.S.) Inc.,	– Yellow Pages –
701 E. Joppa Rd.	for Service & Sales
Towson, MD 21286 U.S.A.

12