Andis Company AGRC manual Model Agrc Cord Pack Use, Model Agrv Cord Pack Use

Page 3

Model AGRC Cord Pack Use

1.Models AGRC/AGRV/AGR+ can be used with either the cord pack or the battery.

2.Remove the transformer wall plug and clipper from the carton.

3.With the clipper in the “OFF” position, insert the adapter plug into the bottom of the clipper. Note that the adapter plug is fitted with a tongue to align properly with the groove in the clipper. Once the adapter plug and clipper are aligned, press firmly together. You may hear a click as the adapter plug contacts engage.

4.Plug the transformer wall plug into the AC outlet as identified on the carton.

5.The clipper is now ready to be used.

Battery

Release

Tongue

Adapter

Plug

Transformer

Wall Plug

Model AGRV Cord Pack Use

1.Models AGRC/AGRV/AGR+ can be used with either the cord pack or the battery.

2.Remove the transformer wall plug and clipper from the carton.

3.With the clipper in the “OFF” position, insert the adapter plug into the bottom of the clipper. Note that the adapter plug is fitted with a tongue to align properly with the groove in the clipper. Once the adapter plug and clipper are aligned, press firmly together. You may hear a click as the adapter plug contacts engage.

4.Plug the transformer wall plug into the AC outlet as identified on the carton. The AGRV cord pack features a power indicator light on the underside of the cord pack tongue. When the light is illuminated, it signifies that the unit has power. NOTE: The light may stay illuminated for a few seconds after unit is unplugged.

5.The clipper is now ready to be used.

6.The AGRV cord pack features five speeds. The speeds are controlled by buttons on the underside of the cord pack tongue (Diagram A). To increase or decrease the speed, press the button to reach the desired speed.

7.You may turn off the clipper when using it at any speed.

8.The speeds are stored in memory, therefore when you turn on the clipper, it will run at the last speed you were using prior to turning it off and unplugging it.

Battery

Release

Tongue

Adapter

Plug

Transformer

Wall Plug

Speed

Buttons

Diagram A

3

Image 3

Contents USE and Care Proper Battery Disposal Battery pack removal and preparation for recyclingTHIS PRODUCT IS INTENDED FOR COMMERCIAL USE Model Agrv Cord Pack Use Model Agrc Cord Pack UseMinimum of one hour Model AGR+ With Battery UseBefore initial use battery pack must be charged for a Read the Following Before Charging this ClipperProblem Charger does not fully charge the battery Guidelines for Battery Pack and Charger USEMuch longer than one that does not. Andis suggests that That has developed a memory to perform like newRefresh To workRemoving blade set OPERATING INSTRUCTIONSCare and servicing of your andis Clipper blades To change the blade drive assembly Replace drive cap Diagram O Replace blade Diagram TDo not overtighten Peligro Para reducir el riesgo de descarga eléctrica Precauciones importantesEste Producto Está Indicado Para USO Comercial Guarde Estas InstruccionesUso del paquete de cables del modelo Agrc Eliminación Adecuada DE LAS BateríasUso del paquete de cables del modelo Agrv Modelo AGR+ con uso de la batería LEA LO Siguiente Antes DE Cargar Esta RecortadoraLuz verde de parpadeo corto Pautas Para EL USO DEL Paquete DE Baterías Y EL Cargador Problema El cargador no carga la batería completamenteBotón Actualizar USO DE LA Función DE ActualizaciónInstrucciones DE Operación Desmontaje DEL Juego DE HojasReemplazo O Cambio DEL Juego DE Hojas Responsable en el caso de lesión debido a este descuido Cambio DEL Conjunto DE Accionamiento DE LAS Hojas Servicio DE Reparación EN FábricaPara cambiar el conjunto de accionamiento de las hojas La remplacer Mises en garde importantesCE Produit EST Réservé À UN Usage Commercial Conserver CES InstructionsUtilisation du cordon modèle Agrc Mise AU Rebut Correcte DES PilesUtilisation du cordon modèle Agrv Vert, clignotements rapprochés Modèle AGR+ avec batterieLire CE QUI Suit Avant DE Charger LA Tondeuse Pendant 1 heure minimumConsignes DE Sécurité Relatives À LA Batterie ET AU Chargeur Utilisation DE LA Fonction DE Rafraîchissement Bouton deRafraîchissement Retrait DU JEU DE Lames Mode D’EMPLOIMaintenance Utilisateur Remplacement OU Changement DU JEU DE LamesPar suite de telles négligences Entretien DES Lames DE LA Tondeuse AndisService DE Réparation EN Usine Remplacement DE L’ENTRAÎNEMENT DE LA LameAndis Company Manufacturer’s 12 Month Limited Warranty